Hey guys so I got a quad cab and its almost summer time and I need power windows!! Any ideas on how I can go about getting power windows in this truck? I tried looking locally for parts trucks but nothing. Not even sure of what parts I would need exactly. Thanks

 

I don't have a list of all the parts you need...but I can tell you it's not a small job to make all 4 doors power windows.

 

i dont care how big of a job it is i'd like to be able to roll down the window on the passenger side when i'm driving or see a hot chick :P At least for the time being the front 2 windows

 

WOW that would be a big undertaking

you would need the window arms as they are differant than with crank arms switches moduals a ton of wiring as it is all tied into the main wiring harness of the truck i would think you can make your own wiring harness for the dash part but it will take some going over of wiring prints to figure out what is needed .

I would think your best bet would be ither buy a wrecked truck with them and switch out everything or go to a wreckers and scavange a ton of parts
I would think it is going to take you a lot or work and a bunch of money to do this one

 

well the wiring I think i can figure out as all I would really need is a 12v source and ground maybe some relays but the parts needed is a different story. I see some kits on ebay basically they hook up to your window crank and work that way. Not sure if those are any good?

 

You would be better off buying doors on CL with everything in them you need.

 

The only doors I could find were from a scrap yard and they wanted $700 each cause of the airbags

 

Air bags are not in the doors.

 

i was planning on doing this and they told me to get the electric arms because the kits that hook to the crank ones don't work well and a good switch kit like this but this is for two doors http://electric-life.com/shopexd.asp?id=1049

 

For switches i'd like to get the ones from a ram and wire them to that just so it looks stock