3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Heater Core

Old Nov 13, 2011 | 05:59 PM
  #1  
skaraider's Avatar
skaraider
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 40
Likes: 0
Default Heater Core

2003 dodge ram 4.7l

Ok I have the instrument panel off, the side pieces off, the cluster out, the cup holders off all the plastic pieces everything else except the TOP piece of the dash board, I can't seem to pry it up I have the piece closest to the windshield up but the one under that I can't get up, Maybe im over looking something but does anything know what I can do to get to the heater core without taking all this out?? the only thing thats stopping me from taking the top piece up is 3 bolts I can't get to that are on the vents that point toward the windshield....

Im trying to change the heater Core.. oh and it also seems nearly impossible without taking the metal bracket that stretches from one side to the other...

any DYI pics or anything Ive been searching I can't find anything, Any help would be greatly appreciated.
 
Reply
Old Nov 13, 2011 | 08:52 PM
  #2  
skaraider's Avatar
skaraider
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 40
Likes: 0
Default

 
Reply
Old Nov 13, 2011 | 10:24 PM
  #3  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

Go into the faq section. Weedahoe has posted Service Manuals. His sig has them as well.
 
Reply
Old Nov 14, 2011 | 08:29 AM
  #4  
skaraider's Avatar
skaraider
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 40
Likes: 0
Default

I have the manual I just can't seem to find where it says how to take it off, ive been thumbing threw it all day and night.
 
Reply
Old Nov 14, 2011 | 12:04 PM
  #5  
skaraider's Avatar
skaraider
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 40
Likes: 0
Default

OK so i figured it out, u have to take the two bolts off the steering to let it drop then there are two more bolts holding that BIG metal bracket that holds your ENTIRE dash in place.. if u take that off u don't have to take the top pieces off.. ILL UPload pics soon
 
Reply
Old Nov 14, 2011 | 12:07 PM
  #6  
skaraider's Avatar
skaraider
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 40
Likes: 0
Default


These bolts to the steering wheel

These bolts hold the BIG bracket on, must drop the steering TO do so
 
Reply
Old Nov 14, 2011 | 01:13 PM
  #7  
abarmby's Avatar
abarmby
Champion
Joined: Nov 2005
Posts: 2,875
Likes: 1
From: North Eastern England
Default

You know.....eveytime I see pics of the dash board being taken out....I cringe!!!
It looks sooooo much of a HUGE job.
Good luck on your repairs bud.
Al.
 
Reply
Old Nov 14, 2011 | 06:15 PM
  #8  
skaraider's Avatar
skaraider
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 40
Likes: 0
Default

thanks man should have it fixed tommorow if the parts house has the part
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:24 AM.