3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Non transponder key in door lock

Thread Tools
 
Search this Thread
 
Old Nov 23, 2011 | 09:20 AM
  #11  
Cthulhu's Avatar
Cthulhu
Captain
Joined: Jun 2007
Posts: 687
Likes: 1
From: Calgary
Default

Odd.. my truck must be a one of a kind then. It does it every time.
 
Reply
Old Mar 29, 2013 | 07:56 PM
  #12  
shaitan34's Avatar
shaitan34
Registered User
Joined: Mar 2013
Posts: 2
Likes: 0
Default

Originally Posted by Cthulhu
We have an RFID key w/o remote and it sets off the alarm when we unlock the door using the tumbler. The alarm turns off when you turn the key to run in the ignition.
Me too..You are not alone.2006 dodge ram 1500 slt
 
Reply
Old Mar 29, 2013 | 09:59 PM
  #13  
shaitan34's Avatar
shaitan34
Registered User
Joined: Mar 2013
Posts: 2
Likes: 0
Default

Copy and paste

I found this helpful...

So, on an '06, to turn the horn on/off it's:

- Stand outside the truck
- Hold down the lock button between 4 and 10 seconds
- Press the Panic button while still holding the Lock button
- Release both buttons at the same time
 
Reply
Old Mar 30, 2013 | 12:46 PM
  #14  
66three83's Avatar
66three83
Captain
Joined: Mar 2010
Posts: 725
Likes: 14
Default

If I use my fob key to unlock the door, the alarm goes off until I insert it into the ignition.
I have the original 2 keys, and both do the same thing. There might be a way to change this using the lock unlock buttons in a certain sequence.
2006 MegaCab
 
Reply




All times are GMT -4. The time now is 03:41 PM.