Ok. I purchased a Python Remote start system. Its model 5704p (574) (Previous model is python 991) Link to actual product > http://www.sonicelectronix.com/item_...574-5704p.html ... I Plan on installing this myself and yes i do have all the tools needed and required to do the install. However the parts is where im getting confused.
Many people are saying that i need resistors and relays for the parking lights, hazards, doorlock/unlock etc.... I've read about 100 articles on the12volt.com and at least a half a dozen on here.
My truck is a 2004 Dodge Ram 1500 ... Not a chipped key.
I've read every diagram and every install manual available and am still questioning myself. Before i get to far into this i want to make sure i have everything i need to do the install correctly without making 10 trips to radio shack or the auto parts store. Any advice you guys can give me would be great. Such as which resisters (I believe 330 and 820 for locks) but i've read several different articles stating diffferently and none on the exact alarm i have.
Thanks again for any advice you guys can give me.

 

Well hopefully someone can help me from this point.
Heres what i have so far, i could use direct assistance with the relays and resistors needed to make the door lock/unlocking work. and whatever else has a question mark.

 

Well, with the help of the12volt i was able to get it fully done.
Just wanted to share a crappy quality video with you guys to let you know i got it working.
http://www.youtube.com/watch?v=BSyiGTJZ-38