3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Front Diff

Thread Tools
 
Search this Thread
 
Old Dec 26, 2011 | 11:55 PM
  #1  
blackram1500's Avatar
blackram1500
Thread Starter
|
Veteran
Joined: Jan 2009
Posts: 310
Likes: 0
From: Victoria BC Canada
Question Front Diff

I have an 2005 dodge ram 1500 and when i am in 4x4 mode it is ruff and alot of virbration up front and i also get a howl sound at the front. is this normal or is there something wrong?
 
Reply
Old Dec 27, 2011 | 01:42 AM
  #2  
Catchin Zs's Avatar
Catchin Zs
Professional
Joined: Nov 2011
Posts: 178
Likes: 0
Default

Do you have a leveling kit?
 
Reply
Old Dec 27, 2011 | 01:47 AM
  #3  
blackram1500's Avatar
blackram1500
Thread Starter
|
Veteran
Joined: Jan 2009
Posts: 310
Likes: 0
From: Victoria BC Canada
Default front diff

Yes i have a 2" level kit on and has been on for the last 2 years.
 
Reply
Old Dec 27, 2011 | 01:55 AM
  #4  
Catchin Zs's Avatar
Catchin Zs
Professional
Joined: Nov 2011
Posts: 178
Likes: 0
Default

Jack the front up, go under there and shake all the ball joints cv axles and everything else to see if anything is loose. If those are fine, then your gears might need a look. Does it grind at all?
 
Reply
Old Dec 27, 2011 | 02:06 AM
  #5  
blackram1500's Avatar
blackram1500
Thread Starter
|
Veteran
Joined: Jan 2009
Posts: 310
Likes: 0
From: Victoria BC Canada
Default front diff

It doesnt grind at all and I just finished changing the gear oil a month ago and there were no pieces of metal in the oil. I do have BF goodrich truck tires on there and thought that that may be the virbration but if it is what would the whining sound be?
 
Reply
Old Dec 27, 2011 | 01:09 PM
  #6  
uponone's Avatar
uponone
Rookie
Joined: Apr 2007
Posts: 84
Likes: 0
Default

Check your CV axles...
 
Reply
Old Dec 27, 2011 | 05:56 PM
  #7  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

I'd check the u-joints in your cv shafts. you shouldnt be able to move them at all. If there is play, they are likely worn and need replacement.
 
Reply
Old Dec 27, 2011 | 10:35 PM
  #8  
blackram1500's Avatar
blackram1500
Thread Starter
|
Veteran
Joined: Jan 2009
Posts: 310
Likes: 0
From: Victoria BC Canada
Question Front Diff

Should I check it while in 4x4 mode and how much play? Any at all or should it be real tight?
 
Reply
Old Dec 27, 2011 | 10:38 PM
  #9  
blackram1500's Avatar
blackram1500
Thread Starter
|
Veteran
Joined: Jan 2009
Posts: 310
Likes: 0
From: Victoria BC Canada
Default

If it is the cv joints is it caused fron the level kit or just a wearing our part from time of use.?
 
Reply
Old Dec 28, 2011 | 12:25 AM
  #10  
blackram1500's Avatar
blackram1500
Thread Starter
|
Veteran
Joined: Jan 2009
Posts: 310
Likes: 0
From: Victoria BC Canada
Default

Is it better to just replace the cv joints or the whole shaft?
 
Reply



All times are GMT -4. The time now is 07:47 AM.