Resonator/Cat Converter
Thread Starter
Joined: Jun 2005
Posts: 5
Likes: 0
RE: Resonator/Cat Converter
Mine looks nothing like that...that looks like a small muffler. It is, however, in the same location. Mine is just an enlarged portion (bubble) in the piping behind the rear pass tire...almost like a small cat. I think I might just put a flowmaster in place of the stock muffler and go from there.
Rookie
Joined: Nov 2006
Posts: 70
Likes: 0
RE: Resonator/Cat Converter
ORIGINAL: Mad Hemi
I removed my muffler and replaced it with a piece of straight 3" pipe.
I have straight pipe from the cats all the way back to the resonator.
I had a local exhuast shop cut a piece of pipe 39 inches long and notch it at both ends.
I re-used the clamps from the muffler to mount the pipe.
Cost me $25.
I got a better exhaust tone out of it and better gas mileage.
I removed my muffler and replaced it with a piece of straight 3" pipe.
I have straight pipe from the cats all the way back to the resonator.
I had a local exhuast shop cut a piece of pipe 39 inches long and notch it at both ends.
I re-used the clamps from the muffler to mount the pipe.
Cost me $25.
I got a better exhaust tone out of it and better gas mileage.