3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Heater core box

Old Jan 27, 2012 | 05:35 PM
  #1  
VaRam2002's Avatar
VaRam2002
Thread Starter
|
Registered User
Joined: Jan 2012
Posts: 2
Likes: 0
Default Heater core box

Hey guys I have it almost torn out what all do I need to undo to get the heater box out ? I have undone the 2 nuts up top and the screw down in the center on the floor but feels hung on something right next to the passenger side wall ?
 
Reply
Old Jan 29, 2012 | 11:44 AM
  #2  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

IDK if these will help or not but here goes

http://tinyurl.com/2vhaqtj
http://www.dieseltruckresource.com/d...d-t210483.html
http://www.turbodieselregister.com/f...-pictures.html
 
Reply
Old Jan 29, 2012 | 02:52 PM
  #3  
bigdaddyII's Avatar
bigdaddyII
Captain
Joined: Sep 2009
Posts: 538
Likes: 0
From: Southern Louisiana
Default

Against the firewall, on the engine side, there are 2 bolts just under where you had to take the a/c lines off.
 
Reply
Old Feb 2, 2012 | 10:59 AM
  #4  
pinwheel's Avatar
pinwheel
Registered User
Joined: Jun 2011
Posts: 2
Likes: 0
Default

Same issue. I have those bolts in the engine bay off....
 
Reply
Old Feb 2, 2012 | 12:03 PM
  #5  
pinwheel's Avatar
pinwheel
Registered User
Joined: Jun 2011
Posts: 2
Likes: 0
Default

I took the wrong bolt off. The second bolt in the engine bay is behind the clip holding the 2 heater core hoses
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:20 AM.