3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Dodge Ram1500 PW/PL problem

Thread Tools
 
Search this Thread
 
Old May 21, 2012 | 10:13 PM
  #1  
td35td's Avatar
td35td
Thread Starter
|
Registered User
Joined: May 2012
Posts: 1
Likes: 0
Default Dodge Ram1500 PW/PL problem

I have a 2005 dodge ram1500 quad cab, and i recently have had the drivers side rear window and power lock quit working. now from the driver seat i can lock all the doors and control all windows except this one. The window would not go up or down. now the other day for some reason the window went down, and my 4 year old son thought that it should be the whole way down. now it wont' go back up, again. and still all other windows and locks will work but this one. didn't think it was just a motor because it being the lock not working as well. is there any other fuses or relays besides the one under the hood, that control each window and lock? any suggestions??
 
Reply
Old May 21, 2012 | 11:36 PM
  #2  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

a lot of guys have issues with the main control on the drivers side door that gets broken solder joints and such
 
Reply
Old May 22, 2012 | 06:59 AM
  #3  
MikeHTally's Avatar
MikeHTally
Champion
Joined: Aug 2007
Posts: 4,702
Likes: 2
From: N. Florida
Default

The window lock-out only affects the windows from what I've read. This sounds like some broken wiring in the left rear door harness. Is there a speaker in the door and does it work?
 
Reply
Old May 22, 2012 | 03:51 PM
  #4  
dodgeboy1979's Avatar
dodgeboy1979
All Star
Joined: Aug 2009
Posts: 762
Likes: 0
From: Lloydminster Alberta Canada
Default

+1 on the broken wiring, i just had to fix my harness, every wire was cracked within the boot from the truck to the door.
 
Reply
Old May 27, 2012 | 01:06 AM
  #5  
timekop's Avatar
timekop
Professional
Joined: Jun 2010
Posts: 100
Likes: 0
From: Southern Illinois
Default

What did you do to the harness wires to fix the prissue? My 02 has that issue.
 
Reply
Old May 29, 2012 | 04:22 PM
  #6  
extremis's Avatar
extremis
Professional
Joined: Aug 2006
Posts: 116
Likes: 0
From: Mission, BC
Default

I soldered and shrink tubed mine back together. A new harness for the door is on the order of $500 at the dealer
 
Reply




All times are GMT -4. The time now is 07:32 PM.