3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Problem with cruise control on 2006 Dodge 1500 crew 4.7l

Thread Tools
 
Search this Thread
 
Old May 26, 2012 | 06:08 AM
  #1  
bigbuck326's Avatar
bigbuck326
Thread Starter
|
Registered User
Joined: May 2012
Posts: 8
Likes: 0
Default Problem with cruise control on 2006 Dodge 1500 crew 4.7l

Mine 2006 Dodge 4.7L , When i turn on the power of cruise control and speed reached 60mph to Push the SET. the power turn off on CRUISE itself after push set. Repeat i turn on push the power wont work while driving. when the motor turn off and come back motor running Again I push the power on it work CRUSIE ligth on same as above.... so i checked the fuse are fine everything.... any hints thank for your time
 
Reply
Old May 27, 2012 | 12:39 AM
  #2  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

Welcome to the site. Do some researching and reading but you might find it to be the wheel sensor in the front drivers side wheel bearing hub assembly.
 
Reply
Old May 27, 2012 | 07:29 AM
  #3  
bigbuck326's Avatar
bigbuck326
Thread Starter
|
Registered User
Joined: May 2012
Posts: 8
Likes: 0
Default

Is ABS on wheel hub to check on loose the plug on front drive side ? Last summer I replaced Wheel Hub twice in 4 yrs and not there on abs senor plug on passager side. Thank Weedhoe
 
Reply




All times are GMT -4. The time now is 03:56 PM.