3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

electrical issue

Old Jun 20, 2012 | 02:26 PM
  #1  
rond97sport's Avatar
rond97sport
Thread Starter
|
Professional
Joined: Nov 2010
Posts: 115
Likes: 0
From: rhode island
Default electrical issue

2004 ram 1500 slt 65k mi.,switching from acc to run causes all gauges to go out,today while driving engine light came on and fuel gauge stopped working pulled codes brake switch 1 high rationality, fuel gauge circuit rationality,ecm intermittent data?.. not sure whats goin here the acc issue been like that for a while but this engine light and multiple codes for intermittent data is new. trucks been sitting for a month while i rebuilt the rear end. any help would be great.im thinking crappy grounds but who knows never had this issue before.
and brake lights are working normally by the way and the code for them is active.
 
Reply
Old Jun 20, 2012 | 02:29 PM
  #2  
p38251's Avatar
p38251
Record Breaker
Joined: Feb 2011
Posts: 2,001
Likes: 0
From: Vanderpool Texas
Default

Sounds like ignition switch is going bad. The electrial portion, not the part where the key goes. Maybe someone with a similar issue can jump in to confirm.
 
Reply
Old Jun 21, 2012 | 04:31 AM
  #3  
rond97sport's Avatar
rond97sport
Thread Starter
|
Professional
Joined: Nov 2010
Posts: 115
Likes: 0
From: rhode island
Default

bump anyone else. i will get the switch friday.cleaned up grounds tonight not that they were dirty but no engine light an fuel gauge is working at the moment
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:51 AM.