3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

problem with ac not blowing at full speed.

Thread Tools
 
Search this Thread
 
Old Jul 6, 2012 | 09:32 PM
  #1  
jnunpallets's Avatar
jnunpallets
Thread Starter
|
New Member
Joined: Dec 2011
Posts: 3
Likes: 0
Default problem with ac not blowing at full speed.

I have a 02 1500 slt 5.9l. My problem is that basically my air does not blow at full speed on cold or hot. If i move it from low to high it gets louder but does not blow really any harder..not to much of a difference than it being on low. I have no idea what it could be and its getting pretty hot in the south can anyone help me?
-
 
Reply
Old Jul 6, 2012 | 10:13 PM
  #2  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

The common issues for that is a bad blower motor resistor block. Do a part search on www.autozone.com and replace it
 
Reply
Old Jul 10, 2012 | 12:35 PM
  #3  
jnunpallets's Avatar
jnunpallets
Thread Starter
|
New Member
Joined: Dec 2011
Posts: 3
Likes: 0
Default

So i got my air to work weed. The problem was a easy fix...thank goodness. Took off the blower motor and looking above it where it blows air there was this type of flap or door that at one time was attached some where above..im guessing near the fire wall. Anyways it was soild plastic and had some type of foam on both sides..it was broken so i just took it out and i now have nice good flowing cold ac
 
Reply




All times are GMT -4. The time now is 09:43 PM.