When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
If you get a chance, start it, turn the overdrive off and go for a spin. If it works normal, the OD clutches are gone (I had to drive my truck this way until I got a replacement trans).
If you get a chance, start it, turn the overdrive off and go for a spin. If it works normal, the OD clutches are gone (I had to drive my truck this way until I got a replacement trans).
Thanks, I read a few threads before posting and found similar to what you posted.
The o/d tow/haul makes no change at all.
Thanks for trying though, I truly appreciate it.
I'll be dropping her off at a transmission place on Monday, Hopefully I won't have to shoot her.
so bring it back to the shop that did the rebuild and tell them to fix it... it sounds like there is a problem with the Torque Management System in there somewhere, possibly a failed Torque Converter or something telling the system to release it into neutral.
Did you ever have the PCM reprogrammed? If so they might have inputted the wrong gear ratios into the program thus causing this issue...
Quite simply, your tranny is toast. Time for a rebuild. If you're really strapped for cash, try a used transmission. You can pick one up for around $400 shipped. I've dealt with these guys before, they are friendly and ship super fast: hxxp://trade1503.car-part.com/ Talk to Zach.