3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Gonna be pulling the dash to replace the heater core, evap core, dryer and doors.

Thread Tools
 
Search this Thread
 
  #1  
Old 01-16-2013, 07:15 PM
Prismatic's Avatar
Prismatic
Prismatic is offline
All Star
Thread Starter
Join Date: Dec 2012
Posts: 849
Received 52 Likes on 44 Posts
Default Gonna be pulling the dash to replace the heater core, evap core, dryer and doors.

Going to do a full refresh on the HVAC system since the one in my truck has fallen to bits. The defrost vent cover has cracked, and all the little bits of grill have fallen down into the heater box. The foam seals are all rotted and blowing around, the heater core sounds like a waterfall, and smells like glycol, and the AC is maybe 20 degrees below ambient.

Soooooo I've got every other part scouted out, but I need help finding those good quality aftermarket blend door replacements. I'd like to switch every door out while I've got the box out.

It's a 2002 1500 quad cab

Thanks guys
 
  #2  
Old 01-16-2013, 10:02 PM
scwpd's Avatar
scwpd
scwpd is offline
Veteran
Join Date: Jan 2010
Location: Williston,sc
Posts: 411
Likes: 0
Received 2 Likes on 2 Posts
Default

Check out heatertreater
 
  #3  
Old 01-16-2013, 10:19 PM
Prismatic's Avatar
Prismatic
Prismatic is offline
All Star
Thread Starter
Join Date: Dec 2012
Posts: 849
Received 52 Likes on 44 Posts
Default

Originally Posted by scwpd
Check out heatertreater
Oh, neat. Looks like I can just repair the failure points.

Thanks
 
  #4  
Old 01-17-2013, 08:15 PM
TejasMtnBiker's Avatar
TejasMtnBiker
TejasMtnBiker is offline
Captain
Join Date: Mar 2005
Location: Dallas
Posts: 663
Received 0 Likes on 0 Posts
Default

got my blend doors @ rock auto, much better quality then the A.zones when I compared them, if only the hvac door motors had slipper clutches/tension relase we'd all be happy
 



Quick Reply: Gonna be pulling the dash to replace the heater core, evap core, dryer and doors.



All times are GMT -4. The time now is 05:53 PM.