3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Any switch or sensor or fuse for airbags? ram '07

Thread Tools
 
Search this Thread
 
  #1  
Old 02-16-2013, 01:25 PM
RamLussier's Avatar
RamLussier
RamLussier is offline
Amateur
Thread Starter
Join Date: Sep 2012
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default Any switch or sensor or fuse for airbags? ram '07

Hi guys,
I'm wondering why my airbag light is open in my dash. I have installed a aftermarket radio and since that, airbag is on... Any idea?

And i did not disconnect battery while installing the radio... Sorry
 
  #2  
Old 03-19-2013, 05:25 AM
RamLussier's Avatar
RamLussier
RamLussier is offline
Amateur
Thread Starter
Join Date: Sep 2012
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

Any idea?
 
  #3  
Old 03-19-2013, 07:52 PM
MikeHTally's Avatar
MikeHTally
MikeHTally is offline
Champion
Join Date: Aug 2007
Location: N. Florida
Posts: 4,702
Received 1 Like on 1 Post
Default

Well first - disconnect the damn battery!! And let it stay disconnected for AT LEAST two minutes before proceeding! Look for an interruption in the passenger seat sensor. If that sensor thinks there is a small amount of weight in the passenger seat, it will disable the passenger air bag. Triple-check all your radio connections. Did you use a proper after-market harness?
 
  #4  
Old 03-20-2013, 07:00 AM
RamLussier's Avatar
RamLussier
RamLussier is offline
Amateur
Thread Starter
Join Date: Sep 2012
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok i'll check for the little sensor... Yes I used a proper harness
 



Quick Reply: Any switch or sensor or fuse for airbags? ram '07



All times are GMT -4. The time now is 09:46 PM.