3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Old 08-05-2015, 09:11 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: Lighting Guides
Print Wikipost

04 Ram electric problem brake lights for trailer

Thread Tools
 
Search this Thread
 
  #1  
Old 08-20-2013, 05:05 PM
chuck_hammer's Avatar
chuck_hammer
chuck_hammer is offline
Veteran
Thread Starter
Join Date: Aug 2013
Location: Ohio
Posts: 365
Likes: 0
Received 1 Like on 1 Post
Default 04 Ram electric problem brake lights for trailer

Hello,
my left rear brake light for the trailer does not work but the left brake light on the truck does work...

I have trailer towing package.. both the 4 pin and 7 pin has the same problem. and both trailer brake light fuses are good on the truck.

I have had little luck finding a wiring diagram for my 04 .. mainly for the trailer towing option

the right brake light does work on truck and trailer. as does the turn signal.

Help.
 
  #2  
Old 08-20-2013, 07:31 PM
MikeHTally's Avatar
MikeHTally
MikeHTally is offline
Champion
Join Date: Aug 2007
Location: N. Florida
Posts: 4,702
Received 1 Like on 1 Post
Default

Bad bulb? Did you check for voltage at the trailer brake light? Are you getting voltage directly at the truck connector?
 
  #3  
Old 08-20-2013, 08:13 PM
chuck_hammer's Avatar
chuck_hammer
chuck_hammer is offline
Veteran
Thread Starter
Join Date: Aug 2013
Location: Ohio
Posts: 365
Likes: 0
Received 1 Like on 1 Post
Default

No voltage at 4 pin or 7 pin for left brake light. but right is OK.

I am a retired auto mechanic, I do know something about wiring .. but without a wiring diagram. I am getting no where.

the voltage was tested with AND without trailer connected.

I guess I should add.. I got truck NEW... never had a trailer connected to truck.
04 Ram 1500 2 wheel drive, V6 5 speed manual, 355 true-loc. trailer towing package. 39,000 miles and never wrecked or had electrical trouble.
 

Last edited by chuck_hammer; 08-20-2013 at 08:17 PM.
  #4  
Old 08-23-2013, 03:54 PM
Mick0311's Avatar
Mick0311
Mick0311 is offline
Registered User
Join Date: Dec 2012
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

My 04 has the same problem. It's the IPM that is crap.
Last I checked, they were 6 months back ordered.
I ended up just rewiring the trailer lights bypassing the IPM.
 
  #5  
Old 08-24-2013, 06:45 AM
chuck_hammer's Avatar
chuck_hammer
chuck_hammer is offline
Veteran
Thread Starter
Join Date: Aug 2013
Location: Ohio
Posts: 365
Likes: 0
Received 1 Like on 1 Post
Default

Thanks, that is what I am about to do today..
I picked up the type that takes power from the truck battery.. as not ADD extra load to IPM.
 
  #6  
Old 08-24-2013, 07:24 AM
Gone Fishin's Avatar
Gone Fishin
Gone Fishin is offline
Record Breaker
Join Date: Feb 2005
Location: Bristol, IN
Posts: 2,309
Likes: 0
Received 1 Like on 1 Post
Default

You might want to try resetting the fcm, as the lighting systems are fed and controlled by that. Disconnect the battery, turn on the headlights to drain residual, reverse.
 
  #7  
Old 08-25-2013, 08:53 AM
chuck_hammer's Avatar
chuck_hammer
chuck_hammer is offline
Veteran
Thread Starter
Join Date: Aug 2013
Location: Ohio
Posts: 365
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Gone Fishin
You might want to try resetting the fcm, as the lighting systems are fed and controlled by that. Disconnect the battery, turn on the headlights to drain residual, reverse.

I do not think that will work,

the head lights are controlled by the computer. so removing the battery cable the computer will shutdown and NOT turn on the head light circuit.
but I did disconnect the battery cable and it was OFF overnight.. just because it was late,

No help. I cut all light wires to trailer under truck, and removed 3 fuses from fuse box, trailer left and trailer right and trailer park lamp.
install powered coupler. I am now good to go.
 
  #8  
Old 08-25-2013, 04:35 PM
Gone Fishin's Avatar
Gone Fishin
Gone Fishin is offline
Record Breaker
Join Date: Feb 2005
Location: Bristol, IN
Posts: 2,309
Likes: 0
Received 1 Like on 1 Post
Default

You may want to try locating another FCM for the future as the left turn is often a symptom of the fcm going south, at which point you won't have the aforementioned headlights and most of the chassis powered components.
 
  #9  
Old 08-26-2013, 07:17 AM
chuck_hammer's Avatar
chuck_hammer
chuck_hammer is offline
Veteran
Thread Starter
Join Date: Aug 2013
Location: Ohio
Posts: 365
Likes: 0
Received 1 Like on 1 Post
Default

Thanks, I had to replace both front wheel bearing yesterday.. 39,000 miles .
for a truck that is well treated and garaged.. this thing is turning into ########.
 
  #10  
Old 11-10-2013, 08:16 AM
retiredpop's Avatar
retiredpop
retiredpop is offline
Registered User
Join Date: Oct 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Had the left trailer signal issue on a 2003 Ram. Installed a Modulite 119190 unit and picked up input feeds from truck tail lights in wiring harness. Spliced output signals into trailer tow connector. Worked well.
 


Quick Reply: 04 Ram electric problem brake lights for trailer



All times are GMT -4. The time now is 10:35 AM.