3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Rattling noise?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-29-2013, 11:11 PM
Wrenched's Avatar
Wrenched
Wrenched is offline
Registered User
Thread Starter
Join Date: Aug 2013
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Rattling noise?

Hey guys,
I have a 2007 single cab, short box , 4x4 with a hemi , little upgrading cat back duals and cold air intake and throttle body spacer. Truck has 170 xxxkm


As I drive around I here a rattling noise / consistent ticking noise as I drive around 40 to 50 km and goes away as the truck down shifts into second , I removed the heat sheilds as they were starting to Rust.

Put the truck up on my buddy's hoist and ran it on the hoist , noise was still present and could be herd loudest around the trans the loudest. I removed the inspection plate off the trans and tightened the torq converter bolts and it still didnt fix, have done transmisson relearns and noise is still here and has not got any louder

Any ideas
 
  #2  
Old 08-30-2013, 05:25 PM
Jarrett198's Avatar
Jarrett198
Jarrett198 is offline
Registered User
Join Date: Feb 2013
Location: Montgomery, Al
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
  #3  
Old 08-30-2013, 08:30 PM
p38251's Avatar
p38251
p38251 is offline
Record Breaker
Join Date: Feb 2011
Location: Vanderpool Texas
Posts: 2,002
Likes: 0
Received 0 Likes on 0 Posts
Default

Cracked flex plate?
 
  #4  
Old 08-30-2013, 08:41 PM
Dew5's Avatar
Dew5
Dew5 is offline
Registered User
Join Date: Jan 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Had similar noise almost sounded heat shields or bad cats. I couldn't find the problem,but a friend was doing some work for me and he found it. I don't have all the details but it was something to with the flywheel. He also said he has seen when it fails it can tear the Trany away from the engine. Hope this helps
 



Quick Reply: Rattling noise?



All times are GMT -4. The time now is 09:54 AM.