3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

New-B with a few questions

Thread Tools
 
Search this Thread
 
  #1  
Old 10-17-2013, 08:37 AM
ASCHENAVAR's Avatar
ASCHENAVAR
ASCHENAVAR is offline
Amateur
Thread Starter
Join Date: Oct 2013
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default New-B with a few questions

Hello guys, I just purchased my first ram, and have a few questions. Its a 2005 1500 with 4.7 auto and 4x4, also had a lift on it (not sure..4-6") 18" rims and 35x12.50s ..have no clue on gearing

Anybody out there running a similar setup and what is your impressions or opinions on the 4.7?

I'm also trying to find out info on the gearing and tire size issue, this is my first lifted truck and I have no clue how that stuff really works. I'm assuming there is still stock gearing because the gas mileage appears to suck and I would have expected more gitty up when I smash the gas (might be why the gas sucks at this point ) ..and recommendations on gearing sizes?

Any info or insight would be greatly appreciated thanks !
 
  #2  
Old 10-17-2013, 10:25 AM
hemi4109's Avatar
hemi4109
hemi4109 is offline
Veteran
Join Date: May 2012
Posts: 405
Likes: 0
Received 0 Likes on 0 Posts
Default

The stock gearing ratio should be listed on the sticker in the glove box. Likely 3.55 or 3.92 but with those big tires and lift, you'd likely be better served with 4.1 at a minimum or 4.56. Either way mileage will never be good with your lift and tires.
 
  #3  
Old 10-17-2013, 11:21 AM
ASCHENAVAR's Avatar
ASCHENAVAR
ASCHENAVAR is offline
Amateur
Thread Starter
Join Date: Oct 2013
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default

Just as I figured..thanks for the heads up on the sticker location I will check into that..everything I've been ready is leaning towards the 4.56s..gotta do front and rear correct?
 
  #4  
Old 10-17-2013, 11:29 AM
TRO14's Avatar
TRO14
TRO14 is offline
Banned
Join Date: Jul 2013
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ASCHENAVAR
Just as I figured..thanks for the heads up on the sticker location I will check into that..everything I've been ready is leaning towards the 4.56s..gotta do front and rear correct?
If you've got a front it needs to be done.
 
  #5  
Old 10-17-2013, 01:29 PM
ASCHENAVAR's Avatar
ASCHENAVAR
ASCHENAVAR is offline
Amateur
Thread Starter
Join Date: Oct 2013
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TRO14
If you've got a front it needs to be done.

Yea I sure do..that's what I thought..thanks! Now another question..anybody running a tuner on something similar to mine? And your opinions and experiences with them?
 



Quick Reply: New-B with a few questions



All times are GMT -4. The time now is 08:49 AM.