3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Whining noise

Old Jul 20, 2014 | 09:14 PM
  #1  
jacks187's Avatar
jacks187
Thread Starter
|
Amateur
Joined: Jul 2014
Posts: 43
Likes: 0
Default Whining noise

I have a 2006 Dodge Ram 2500. Its making a faint whining noise under the hood. Never had any major problems with it. Theres no problems as far as acceleration or anything. Any suggestions?
 
Reply
Old Jul 21, 2014 | 10:07 AM
  #2  
gcburkett's Avatar
gcburkett
Veteran
Joined: Feb 2011
Posts: 437
Likes: 1
From: Chicago suburbs
Default

Does it whine when the truck is stationary or only when moving? Does it change either pitch or loudness with engine speed? After these simple questions other will be able to provide more direction of where to look for the source of the noise.
 
Reply
Old Jul 21, 2014 | 11:42 AM
  #3  
jacks187's Avatar
jacks187
Thread Starter
|
Amateur
Joined: Jul 2014
Posts: 43
Likes: 0
Default w

Originally Posted by gcburkett
Does it whine when the truck is stationary or only when moving? Does it change either pitch or loudness with engine speed? After these simple questions other will be able to provide more direction of where to look for the source of the noise.
Its a faint whine while stationary, can barely hear it...when the engine is revd and while accelerating driving, the pitch gets louder.........almost sounds like it has turbo.........or also mimics the whine of the stereo amplifier through the speakers........its definately not that......discon ected all of that to make sure........
 
Reply
Old Jul 21, 2014 | 11:45 AM
  #4  
jacks187's Avatar
jacks187
Thread Starter
|
Amateur
Joined: Jul 2014
Posts: 43
Likes: 0
Default whining noise

Originally Posted by jacks187
Its a faint whine while stationary, can barely hear it...when the engine is revd and while accelerating driving, the pitch gets louder.........almost sounds like it has turbo.........or also mimics the whine of the stereo amplifier through the speakers........its definately not that......disconnected all of that to make sure........
thats it
 
Reply
Old Jul 21, 2014 | 02:21 PM
  #5  
gcburkett's Avatar
gcburkett
Veteran
Joined: Feb 2011
Posts: 437
Likes: 1
From: Chicago suburbs
Default

How long as it been since you change your belt? I would investigate the pulley and belt driven accessories
 
Reply
Old Jul 21, 2014 | 02:35 PM
  #6  
djbucky3's Avatar
djbucky3
Captain
Joined: May 2013
Posts: 592
Likes: 0
From: Virginia, Florida
Default

Water pump is also a possible suspect.
 
Reply
Old Jul 21, 2014 | 02:48 PM
  #7  
TejasMtnBiker's Avatar
TejasMtnBiker
Captain
Joined: Mar 2005
Posts: 663
Likes: 0
From: Dallas
Default

mine did that and it was the rear bearing in my alternator, took the alt apart, went down to bearing supply and got a new bearing for less then 10 bucks... this was after I put on new pulley bearings
 
Reply
Old Jul 21, 2014 | 04:41 PM
  #8  
cd36c's Avatar
cd36c
Professional
Joined: Jun 2014
Posts: 103
Likes: 1
Default

Pull your serpentine belt off and check all pulleys for play, or roughness when turning by hand. If the belt hasn't been replaced in a while, or it looks in rough condition you can try replacing the belt as well.

If you suspect belt, you can run a bar of soap on it while the engine is running, you'll slowly hear the whine go away. It will come back but it can hep diagnose a bad belt.
 
Reply
Old Jul 21, 2014 | 04:54 PM
  #9  
tantofolder's Avatar
tantofolder
Professional
Joined: Apr 2011
Posts: 130
Likes: 1
From: VA
Default

I 2nd the waterpump suspect.Grab the waterpump pulley and see if it has any play/movement.It's better to change that out before it craps out on the highway,and as suggested check all the other belt/pulley accessories.
 
Reply
Old Jul 21, 2014 | 10:11 PM
  #10  
jacks187's Avatar
jacks187
Thread Starter
|
Amateur
Joined: Jul 2014
Posts: 43
Likes: 0
Default

I appreciate all the suggestions and will get to working on all. The belt is still original. Truck just hit 95000 miles. The pulleys seem more logical but all pretty much does need replacing and a good tune up. Thanks again, will post the issue once I find it!
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:19 AM.