3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Hemi low oil pressure

Thread Tools
 
Search this Thread
 
Old Aug 15, 2016 | 11:25 PM
  #1  
DirtHogg's Avatar
DirtHogg
Thread Starter
|
Amateur
Joined: Oct 2014
Posts: 26
Likes: 0
Default Hemi low oil pressure

Well I bought a 2007 3500 1 ton hemi.I was lied to full on by the now moved owner.I know someone is thinking ,why didn't you have it checked out first.I did and with all new front end and a showroom clean engine.My mech buddy said it was a great deal,never even towed this truck 189,00 km.Long story short drove it a little farther 30 min .Engine light came on ,then I stopped and checked oil,yes oil ok.then started it up again knocking sound and oil pressure dropped and moved back and forth.Checked oil again ,low oil.So added 2 qaurts
and drove it home.Mech buddy coded it and said oil is making it past crank when it gets hot.Too make up for his bad call he has offered to get a replacement engine off kijij.Said cheaper than redoing the crank ,lots of hemis out their cheap.Does this sound right to you guys or should I have a rebuild done in stead of motor swap.Any and all advice would very much be appreciated .Thank-You DirtHogg
 
Reply
Old Aug 16, 2016 | 01:12 AM
  #2  
Chet Ubetcha's Avatar
Chet Ubetcha
3rd Gen Ram Moderator
Joined: Jul 2005
Posts: 1,596
Likes: 16
From: Cádiz, Spain
Default

So, the dude disappeared within 30 minutes of taking your money?
 
Reply
Old Aug 16, 2016 | 01:53 PM
  #3  
DirtHogg's Avatar
DirtHogg
Thread Starter
|
Amateur
Joined: Oct 2014
Posts: 26
Likes: 0
Default

chet abbreviated story ,thanks for the help
 
Reply
Old Aug 16, 2016 | 02:57 PM
  #4  
p38251's Avatar
p38251
Record Breaker
Joined: Feb 2011
Posts: 2,001
Likes: 0
From: Vanderpool Texas
Default

If you are replacing the engine. If you do a crate engine it will have a warranty.
 
Reply




All times are GMT -4. The time now is 11:20 AM.