3rd gen 1500 stock height
Thread Starter
|
Professional
Joined: Nov 2008
Posts: 122
Likes: 0
From: Kiev, Ukraine
3rd gen 1500 stock height
Hi Guys
The truck's an '03 Ram 1500 4.7L 4X4.
Dumb mistake... I had a friend of mine install torsion bar keys on my truck at his garage, but I forgot to ask him to measure the stock height (from the bottom of the rim to the edge of the wheel bay) before installing. Now I can't figure how much the vehicle has actually been levelled before making any further adjustments.
Anyone out there know the stock height? I'd sure appreciate any feedback.
Thanks!
The truck's an '03 Ram 1500 4.7L 4X4.
Dumb mistake... I had a friend of mine install torsion bar keys on my truck at his garage, but I forgot to ask him to measure the stock height (from the bottom of the rim to the edge of the wheel bay) before installing. Now I can't figure how much the vehicle has actually been levelled before making any further adjustments.
Anyone out there know the stock height? I'd sure appreciate any feedback.
Thanks!
Professional
Joined: Sep 2016
Posts: 123
Likes: 2
From: Las vegas
Bakerman;
I have an 04 quad cab 4wd and I measured bottom of wheel to top inside of wheel well and mine is 31 5/16".
My wheels are OEM off-road cast AL 17"s
The suspension is stock with Monroe reflex shocks
Hope this helps
I have an 04 quad cab 4wd and I measured bottom of wheel to top inside of wheel well and mine is 31 5/16".
My wheels are OEM off-road cast AL 17"s
The suspension is stock with Monroe reflex shocks
Hope this helps
Thread Starter
|
Professional
Joined: Nov 2008
Posts: 122
Likes: 0
From: Kiev, Ukraine
Helps a lot! Thanks so much!