3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2002 Dodge Ram 1500 5.9 L Gas

Thread Tools
 
Search this Thread
 
Old Mar 23, 2018 | 01:01 PM
  #1  
709byrne's Avatar
709byrne
Thread Starter
|
Registered User
Joined: Mar 2018
Posts: 2
Likes: 0
Default 2002 Dodge Ram 1500 5.9 L Gas

I Have A 2002 Dodge Ram 1500 4X4 5.9L Engine.I Supposedly Lost The Computer In The Vehicle;It Would Not Start,Etc. I Purchased A Computer From An Auto Recycler,From The Same Type Truck,Same Part #`s As Original Computer.After Installing,It Would Start And Run For 5 Secs,Then Stop. I Have A Computer From A 1997 Dodge Ram,5.2 L Engine .When I Plug This In,The Truck Will Start Fine But No Guages Are Working.I Then Ordered A Computer From Stateside Programmed For My Truck But Nothing Happens:No Start,No Guages,Etc. Anyone Have Any Ideas About What Could Be Happening? Thanks In Advance.
 
Reply
Old Aug 10, 2022 | 09:19 PM
  #2  
Alex28's Avatar
Alex28
Registered User
Joined: Aug 2022
Posts: 3
Likes: 0
Default 2002 dodge ram 1500 4x4 5.9 gas

New pcm vin programmed New iac New tps New spark plugs truck will not idle does not die start driving runs great till I stop then starts spitting and sputtering any ideas would be great
 

Last edited by Alex28; Aug 10, 2022 at 09:23 PM.
Reply
Old Aug 11, 2022 | 06:21 AM
  #3  
95RAM360's Avatar
95RAM360
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
Default

Originally Posted by 709byrne
I Have A 2002 Dodge Ram 1500 4X4 5.9L Engine.I Supposedly Lost The Computer In The Vehicle;It Would Not Start,Etc. I Purchased A Computer From An Auto Recycler,From The Same Type Truck,Same Part #`s As Original Computer.After Installing,It Would Start And Run For 5 Secs,Then Stop. I Have A Computer From A 1997 Dodge Ram,5.2 L Engine .When I Plug This In,The Truck Will Start Fine But No Guages Are Working.I Then Ordered A Computer From Stateside Programmed For My Truck But Nothing Happens:No Start,No Guages,Etc. Anyone Have Any Ideas About What Could Be Happening? Thanks In Advance.

the 97 has different sensors the pcm tries to read so this won’t work…

have you verified that the harness connectors has no pulled pins or damaged wires? Why did you replace in the first place
 
Reply




All times are GMT -4. The time now is 07:26 AM.