Hi. New member here. Water pump issue
Thread Starter
|
Registered User
Joined: May 2019
Posts: 1
Likes: 0
Hi. New member here. Water pump issue
Hello all. I have had an 03 2500 HD since dec 18.
Can anyone help. I recently replaced my radiator and water pump I have temporarily bypassed the plugged up heater core, but I have a stream of water shooting out from behind the water pump on to the breather assembly . I am not very mechanically inclined so I’m not sure if that is a mounting bracket or the front of the block that the water pump is mounted to. I have submitted video. Hopefully it did.
Can anyone help. I recently replaced my radiator and water pump I have temporarily bypassed the plugged up heater core, but I have a stream of water shooting out from behind the water pump on to the breather assembly . I am not very mechanically inclined so I’m not sure if that is a mounting bracket or the front of the block that the water pump is mounted to. I have submitted video. Hopefully it did.
Last edited by Jeeps; May 28, 2019 at 07:28 PM. Reason: Video / more clarification.
All Star
Joined: Mar 2006
Posts: 833
Likes: 68
From: Chesapeake, VA
How did you bypass the heater core? Did you block off the heater core outlets on the water pump?
Or, you may have pinched the water pump gasket.
These are just suggestions for you to check while trying to get the video up.
Or, you may have pinched the water pump gasket.
These are just suggestions for you to check while trying to get the video up.