2007 RAM 1500 ETC issue
Thread Starter
|
Registered User
Joined: Dec 2019
Posts: 1
Likes: 0
2007 RAM 1500 ETC issue
Hello all,
New member here, I have a 2007 RAM 1500 that I had the ETC replaced approximately 2-years ago. 2-weeks ago it reared its ugly head again. I ordered a new ETC and replaced it today. When done I fired up the truck with no warning lights and was running smoothly for about 10-seconds. The warning lights came back on and we are back to square one. I tried the Key trick to see about getting the computer codes. I didn't receive any p codes, in the odometer, it came up as C 315, C 542, and S 35. Googling the codes came up with nothing.
I tried it numerous times and it read the same thing. Any help and direction would be greatly appreciated.
Thanks,
New member here, I have a 2007 RAM 1500 that I had the ETC replaced approximately 2-years ago. 2-weeks ago it reared its ugly head again. I ordered a new ETC and replaced it today. When done I fired up the truck with no warning lights and was running smoothly for about 10-seconds. The warning lights came back on and we are back to square one. I tried the Key trick to see about getting the computer codes. I didn't receive any p codes, in the odometer, it came up as C 315, C 542, and S 35. Googling the codes came up with nothing.
I tried it numerous times and it read the same thing. Any help and direction would be greatly appreciated.
Thanks,
Professional
Joined: Jan 2006
Posts: 205
Likes: 12
From:
Search c- codes , I did find this one , which leads me to believe you have weak grounds in the system or something shorted out , and bad grounds on these trucks are big issues
C0315 Motor Ground Circuit Open
C0315 Motor Ground Circuit Open