3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Bed removal

Thread Tools
 
Search this Thread
 
Old Feb 24, 2020 | 11:44 AM
  #1  
Ram05red's Avatar
Ram05red
Thread Starter
|
Rookie
5 Year Member
Joined: Feb 2018
Posts: 67
Likes: 0
From: FL
Default Bed removal

How hard is it to remove the bed or tilt it to one side?
 
Reply
Old Feb 26, 2020 | 03:13 PM
  #2  
69_XS29L's Avatar
69_XS29L
Veteran
10 Year Member
Joined: Mar 2013
Posts: 277
Likes: 37
From: Sunny ****ing Nevada, Rockies to B.C.
Default

This is a Gen II, wanted to find a way to change a fuel pump on the side of the road without dropping a potentially full fuel tank. My 2003 looks no more difficult than this.


Left the back two bolts in for a hinge. Fuel filler neck is the hardest part. I carry a little bit of cribbing under the tool box for lifting the truck in soft conditions.
 
Reply
Old Feb 26, 2020 | 04:26 PM
  #3  
Ram05red's Avatar
Ram05red
Thread Starter
|
Rookie
5 Year Member
Joined: Feb 2018
Posts: 67
Likes: 0
From: FL
Default

Okay, thank you. I'm replacing my fuel pump as well but I already dropped the tank.
 
Reply
Old Feb 26, 2020 | 05:11 PM
  #4  
69_XS29L's Avatar
69_XS29L
Veteran
10 Year Member
Joined: Mar 2013
Posts: 277
Likes: 37
From: Sunny ****ing Nevada, Rockies to B.C.
Default

You are certainly welcome, good luck.
 
Reply




All times are GMT -4. The time now is 04:44 PM.