3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Front Door Wiring Harness

Old Jun 1, 2020 | 05:25 PM
  #1  
forseys's Avatar
forseys
Thread Starter
|
Registered User
Joined: Jun 2020
Posts: 1
Likes: 0
Question Front Door Wiring Harness

I have a 2006 Dodge Ram 1500. The part I am looking for is a female disconnect terminal that goes inside the housing of the wiring harness that connects to the master switch. Since I can't find a terminal the same size I could just buy the whole harness (part number 56051935AB) but it is discontinued. Does anyone know where I can either find a terminal disconnect or a wiring harness with the same size disconnects that I can take out and use?

Housing for the terminals

female disconnect terminal that needs to be replaced.
 
Reply
Old Jun 1, 2020 | 09:21 PM
  #2  
fj5gtx's Avatar
fj5gtx
Record Breaker
Joined: Sep 2007
Posts: 1,810
Likes: 105
From: PA
Default

What I did, was grab a junk yard harness, de-pin the color I wanted and swap that wire. I had a tough time on the de-pin of the harness where it connects at the cab - ended up buying specialized pin tools that the factory service manual suggests. That connector might de-pin with normal tools...
 
Reply
Old Jun 8, 2020 | 07:46 PM
  #3  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

http://connectors.dcctools.com/home....A972DDCBDF9F62
 
Reply
Old Jun 8, 2020 | 08:18 PM
  #4  
TrueDogman's Avatar
TrueDogman
Captain
Joined: Mar 2012
Posts: 597
Likes: 33
Default

Weedahoe is back! Good to cya !! 😊
 
Reply
Old Jun 15, 2020 | 08:36 PM
  #5  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

Originally Posted by TrueDogman
Weedahoe is back! Good to cya !! 😊
Thanks. I drift in from time to time but I spend so much time out of town on different job sites now that I dont care to get online much these days when i have down time
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:09 PM.