Lower a/c housing replacement - with or without dash
Thread Starter
|
Registered User
Joined: Dec 2020
Posts: 2
Likes: 0
Lower a/c housing replacement - with or without dash
Hello everybody
Just recently purchased a 3rd Gen Ram1500 (first half ton truck). This will be my first post so please be gentle, looking forward to being part of the community.
So I recently took out the seats and carpet to give them a good cleaning and noticed underneath the dash the lower a/c housing (Part Number: 68021975AB) was all cut up and covered in tape. My question to the group is can I replace that part without dropping the dash or can I unbolt the bottom screws and replace the housing.
Any advice is greatly appreciated, looking forward to hearing from you guys
O
Just recently purchased a 3rd Gen Ram1500 (first half ton truck). This will be my first post so please be gentle, looking forward to being part of the community.
So I recently took out the seats and carpet to give them a good cleaning and noticed underneath the dash the lower a/c housing (Part Number: 68021975AB) was all cut up and covered in tape. My question to the group is can I replace that part without dropping the dash or can I unbolt the bottom screws and replace the housing.
Any advice is greatly appreciated, looking forward to hearing from you guys
O
Record Breaker
Joined: Apr 2019
Posts: 1,680
Likes: 262
Sounds like someone put in a Heater Treater blend door fix in your truck: https://heatertreater.net/dodge-ram-02-08
You can replace the assembly, but the dash has to come out. Or at least up enough for clearance.
You can replace the assembly, but the dash has to come out. Or at least up enough for clearance.