ok, so i found where the wires covered by the blue jacket goes…it in fact goes to the amp….now here the big question…what wire is what and where does each particular wire goes in accordance to the pins in the back of this factory radio…it may be a long shot but does anyone on here have a diagram possibly..?

 

See my post above for a link to wiring diagrams.

 

You could also contact a specialty company like crutchfield, metra, or scosche and see if they have an adapter that is color-matched to your wires and plugs into the back of the stock HU.
I'm guessing here, but think you are going to find that the previous installer bypassed the infinity amp.

 

i tore the dash apart yesterday evening, they bypassed the amp completely…im not a installer so i aint got a clue what wire go back to what soo yeah….il try calling crutchfields an see if they can give me some insight….may just take it back to the installer and have them fix it

 

Take a look at the wiring where it bypasses the amp, did they use a harness, or, are the wires spliced together? Most installers bypass the amp with a harness that is designed for this purpose. If they did use a harness, you are in good shape. You can remove the harness and plug the stock wiring into the amp. If they did not use a harness you will likely never get the amp to work and I'd recommend getting a new amp. The crutchfield site should have a picture of the bypass harness.

 

it looks like they did use a harness but, the plug that comes out of the dash and plugs into the back of the radio was cut off an hardwired, every junkyard i have been to that has the year model of mine does not have that extra plug, so frustrating