2008 3.7 Engine Swap
Thread Starter
|
Registered User
Joined: Jul 2023
Posts: 1
Likes: 0
2008 3.7 Engine Swap
2008 3.7 Engine Swap
I have a 2008 2008 Ram 1500, 3.7, 6 speed.
I am getting ready to replace the engine with a remanufactured one probably from Powertrain Company.
I'm going to be replacing the clutch at the same time.
I wanted to get anybody's take on what parts I might not want to reuse, e.g., might be getting ready to fail at 200k miles, or anything else to buy or look out for before I start pulling it apart.
Any thoughts are much-appreciated in advance.
I have a 2008 2008 Ram 1500, 3.7, 6 speed.
I am getting ready to replace the engine with a remanufactured one probably from Powertrain Company.
I'm going to be replacing the clutch at the same time.
I wanted to get anybody's take on what parts I might not want to reuse, e.g., might be getting ready to fail at 200k miles, or anything else to buy or look out for before I start pulling it apart.
Any thoughts are much-appreciated in advance.
Last edited by jkeaton; Jul 19, 2023 at 03:27 PM. Reason: no cross posting
