Cam For Hemi
Record Breaker
Joined: Feb 2005
Posts: 2,192
Likes: 0
From:
RE: Cam For Hemi
ORIGINAL: steve00ram360
go to www.krcperformance.com and look for a cam there... they are strickly mopar nuts there and probably have something you would like.
go to www.krcperformance.com and look for a cam there... they are strickly mopar nuts there and probably have something you would like.
Hall Of Fame
Joined: Jan 2004
Posts: 12,944
Likes: 308
RE: Cam For Hemi
ORIGINAL: osteodoc08
Nice website. Oh, how I'd love to have a 500rwhp turbo'd Hemi...
ORIGINAL: steve00ram360
go to www.krcperformance.com and look for a cam there... they are strickly mopar nuts there and probably have something you would like.
go to www.krcperformance.com and look for a cam there... they are strickly mopar nuts there and probably have something you would like.
yeah! now that I have a CTD... I read about 700~800 hp 5.9 CTD's with over 1000 ft lbs of torque...
Champion
Joined: Aug 2005
Posts: 3,313
Likes: 8
RE: Cam For Hemi
Steve Dulcich's experiments with Hemi cams
plus his quick test of factory cast iron manifolds versus TTI long primary tube headers
is worth a read...
http://popularhotrodding.com/enginem.../0602phr_hemi/
plus his quick test of factory cast iron manifolds versus TTI long primary tube headers
is worth a read...
http://popularhotrodding.com/enginem.../0602phr_hemi/
Record Breaker
Joined: Jul 2005
Posts: 1,421
Likes: 0
From: Orlando, FL
RE: Cam For Hemi
You can swap the 6.1L Hemi cam and heads right on to your 5.7L. You should also get some bee hive springs to go along with the combo. With all the other bolt on's you will be right into the 13's. Get the Superchimps programmer and some slicks too. You got money???
Record Breaker
Joined: Feb 2005
Posts: 2,192
Likes: 0
From:
RE: Cam For Hemi
ORIGINAL: YeahItsAHemi345
You can swap the 6.1L Hemi cam and heads right on to your 5.7L. You should also get some bee hive springs to go along with the combo. With all the other bolt on's you will be right into the 13's. Get the Superchimps programmer and some slicks too. You got money???
You can swap the 6.1L Hemi cam and heads right on to your 5.7L. You should also get some bee hive springs to go along with the combo. With all the other bolt on's you will be right into the 13's. Get the Superchimps programmer and some slicks too. You got money???
Joined: Dec 2005
Posts: 17
Likes: 0
From:
RE: Cam For Hemi
Hey Richie...just got on here...Cody ...haha
anyways...what Hemi345 said is very true. With a full exhaust (l.t. headers), good intake, superchimps and the 6.1 cam you should be in the 13's decently.
In reference to the 4.56's... if you have the 3.92 l.s. rear-end then you should be just fine with the jump to 4.56 but if you have the 3.55 you may only want to do 4.11's or whatever, but i would just say hell with it and go 4.56!
Do NOT fear the gear!
anyways...what Hemi345 said is very true. With a full exhaust (l.t. headers), good intake, superchimps and the 6.1 cam you should be in the 13's decently.
In reference to the 4.56's... if you have the 3.92 l.s. rear-end then you should be just fine with the jump to 4.56 but if you have the 3.55 you may only want to do 4.11's or whatever, but i would just say hell with it and go 4.56!
Do NOT fear the gear!
Record Breaker
Joined: Jul 2005
Posts: 1,421
Likes: 0
From: Orlando, FL
RE: Cam For Hemi
ORIGINAL: 004hemi
Hey Richie...just got on here...Cody ...haha
anyways...what Hemi345 said is very true. With a full exhaust (l.t. headers), good intake, superchimps and the 6.1 cam you should be in the 13's decently.
In reference to the 4.56's... if you have the 3.92 l.s. rear-end then you should be just fine with the jump to 4.56 but if you have the 3.55 you may only want to do 4.11's or whatever, but i would just say hell with it and go 4.56!
Do NOT fear the gear!
Hey Richie...just got on here...Cody ...haha
anyways...what Hemi345 said is very true. With a full exhaust (l.t. headers), good intake, superchimps and the 6.1 cam you should be in the 13's decently.
In reference to the 4.56's... if you have the 3.92 l.s. rear-end then you should be just fine with the jump to 4.56 but if you have the 3.55 you may only want to do 4.11's or whatever, but i would just say hell with it and go 4.56!
Do NOT fear the gear!
BTW, Sup dude?!?!?
Joined: May 2005
Posts: 18
Likes: 0
RE: Cam For Hemi
I also have an ST HEMI. The only options were 3.92 gear and posi. (And cloth seats, lol)
I thought I had the only one. Guess not. Bone stock with a 200lb. shell on the back and a
280 lb. driver it ran a 15.15 @ 88mph
I thought I had the only one. Guess not. Bone stock with a 200lb. shell on the back and a
280 lb. driver it ran a 15.15 @ 88mph