3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

03 hmei showing codes please help

Thread Tools
 
Search this Thread
 
  #1  
Old 05-18-2006 | 07:01 PM
hemination03's Avatar
hemination03
Thread Starter
|
Registered User
Joined: Apr 2006
Posts: 18
Likes: 0
Default 03 hmei showing codes please help

I have a 03 4x4 hemi quad cab. I was driving on the highway and the engine light came on and so did a lightning bolt symbol in the right corner. The codes it spit out are p2175 and p2106. Any help would be great. Thanks
 
  #2  
Old 05-18-2006 | 08:45 PM
osteodoc08's Avatar
osteodoc08
Record Breaker
Joined: Feb 2005
Posts: 2,192
Likes: 0
From:
Default RE: 03 hmei showing codes please help

P2175 Throttle Actuator Control System - Low Airflow Detected
P2106 Throttle Actuator Control System - Forced Limited Power

I have no idea what these mean though. When was the last time you changed your air filter? How many miles on the motor? Last time maintenance performed like plugs and wires? Any other problems?

The lightning bolt is for the charging system, IIRC. Have any problems starting, charging, light dimming, etc?


Also, [sm=welcomesign.gif] to DF
 
  #3  
Old 05-18-2006 | 09:07 PM
hemination03's Avatar
hemination03
Thread Starter
|
Registered User
Joined: Apr 2006
Posts: 18
Likes: 0
Default RE: 03 hmei showing codes please help

No other problems. just cleaned the K&N about 2 weeks ago. The truck has 40,000 on it. Are these parts easy to fix or are they expensive. Thanks for the info
 
  #4  
Old 05-18-2006 | 10:33 PM
osteodoc08's Avatar
osteodoc08
Record Breaker
Joined: Feb 2005
Posts: 2,192
Likes: 0
From:
Default RE: 03 hmei showing codes please help

How much oil is on the K&N filter? I'm not quite sure what the codes mean or the part effected, but it seems possible that it could be related to the K&N filter and over oiling? I would see if the codes go away after a day or so, because it doesn't seem like a common problem or even from a definite source. Maybe a sensor or the TB? Definitely a weird code to throw.
 
  #5  
Old 05-19-2006 | 03:39 PM
osteodoc08's Avatar
osteodoc08
Record Breaker
Joined: Feb 2005
Posts: 2,192
Likes: 0
From:
Default RE: 03 hmei showing codes please help

Found it. There is a TSB for P2174 and P2175. Clicky clicky.
 
  #6  
Old 04-19-2007 | 03:57 AM
TejasMtnBiker's Avatar
TejasMtnBiker
Captain
Joined: Mar 2005
Posts: 663
Likes: 0
From: Dallas
Default RE: 03 hmei showing codes please help

ok so I took all my intake areas off ( not motor intake) and low & behold, a nice thick coating of oil or some sorta gummy funk that I usualy see in lawn mower carbs... I'm gonan do the thorough cleaning as posted in the link, just curious how well this put the code P2175 to rest?
 
  #7  
Old 05-01-2007 | 02:56 PM
TejasMtnBiker's Avatar
TejasMtnBiker
Captain
Joined: Mar 2005
Posts: 663
Likes: 0
From: Dallas
Default RE: 03 hmei showing codes please help

wooooo hooooo 4 can's of brake cleaner later, a ruined tupperware container and this problem is fixed!! Lemme tell ya there was a lot of gunk in there & the TB, going on week 2 today and not a single blip of the codes mpg is back up to 18-20 finally, sure is nice now that it's almost 3 bills again... thanks for all the previousinput guys
 
  #8  
Old 05-01-2007 | 03:06 PM
Mlfoote's Avatar
Mlfoote
Joined: Dec 2006
Posts: 20
Likes: 0
From:
Default RE: 03 hmei showing codes please help

The lightening bolt isn't charging system though it is the ETC Electronic Throttle Control.
 
  #9  
Old 05-01-2007 | 03:36 PM
TejasMtnBiker's Avatar
TejasMtnBiker
Captain
Joined: Mar 2005
Posts: 663
Likes: 0
From: Dallas
Default RE: 03 hmei showing codes please help

strange but mine stopped the lightning bolt as well...
 
  #10  
Old 06-18-2007 | 12:31 AM
itsmejto's Avatar
itsmejto
Amateur
Joined: May 2006
Posts: 39
Likes: 0
From:
Default RE: 03 hmei showing codes please help

There is a bulletin for dodge rams early 03 for charging problems, a firmware reload can be done at your local dodge dealer.
http://195.125.241.148/support/flyer/fl0804.htm
 



All times are GMT -4. The time now is 02:21 AM.