3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engine)

Thread Tools
 
Search this Thread
 
Old Jun 14, 2006 | 12:45 AM
  #1  
Stealth3si's Avatar
Stealth3si
Thread Starter
Joined: Jun 2006
Posts: 5
Likes: 0
From:
Default 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engine)

I know of someone who has a used whipple supercharger dual pulley that came off of a '99 chevy tahoe 5.7L vortex engine. What I want to know is if anyone out there who would tell me if that supercharger is compatible with my 2003 dodge ramtruck 4.7L? Let me know if there is any important information that needs to be mentioned or specific information that would be helpful to you. Thank you.
 
Reply
Old Jun 14, 2006 | 01:35 AM
  #2  
Stealth3si's Avatar
Stealth3si
Thread Starter
Joined: Jun 2006
Posts: 5
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

Lemme clarify myself once again if I may sound a tiny bit hogwash, the whipple supercharger might be a 1996 - 2000 Vortec 5.7 L31 Engine. If that be the case, then i reckon it may or may not be compatible with my 4.7L. However on the course of one hand, the whipple supercharge has already been used on the Tahoe. Hope that helps.
 
Reply
Old Jun 14, 2006 | 01:41 AM
  #3  
Ramsport_03's Avatar
Ramsport_03
Joined: Jun 2006
Posts: 32
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

i wouldn't even try it, chevy small block vs a 6 cylinder mopar, big difference there. So no, dont think it would work
 
Reply
Old Jun 14, 2006 | 02:10 AM
  #4  
Stealth3si's Avatar
Stealth3si
Thread Starter
Joined: Jun 2006
Posts: 5
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

Thank you kind sir (or lady).
 
Reply
Old Jun 14, 2006 | 02:57 AM
  #5  
The Burning Rom's Avatar
The Burning Rom
Record Breaker
Joined: May 2005
Posts: 2,415
Likes: 0
From: Wisconsin
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

ORIGINAL: Ramsport_03
i wouldn't even try it, chevy small block vs a 6 cylinder mopar, big difference there. So no, dont think it would work
The 4.7 is an 8 cylinder small block

I'm not saying this couldn't work......because you could make it work. But it would require a lot of $$$ just to make a different lower intake manifold to mount the blower on, and a custom crank pulley to run the blower. Then of course there's the fueling...and the computer work. It wouldn't be a "bolt on" mod. [&:]
 
Reply
Old Jun 14, 2006 | 06:24 AM
  #6  
stykthyn's Avatar
stykthyn
Professional
Joined: Nov 2005
Posts: 147
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

not worth the effort, get an STS turbo system. for around 4K you get all the hardware and a coputer tuning system to make some unholy gains
 
Reply
Old Jun 14, 2006 | 02:46 PM
  #7  
BgBluRam's Avatar
BgBluRam
Captain
Joined: Oct 2005
Posts: 623
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi


ORIGINAL: Ramsport_03

i wouldn't even try it, chevy small block vs a 6 cylinder mopar, big difference there. So no, dont think it would work
LOL 6 cyl??? n00b, need I say more.
 
Reply
Old Jun 16, 2006 | 01:15 AM
  #8  
Ramsport_03's Avatar
Ramsport_03
Joined: Jun 2006
Posts: 32
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

keep forgetting that the 4.7 is a 8, and noob, i think not, i'm on my second dodge, been in the auto business for 13 years
 
Reply
Old Jun 16, 2006 | 11:59 PM
  #9  
Stealth3si's Avatar
Stealth3si
Thread Starter
Joined: Jun 2006
Posts: 5
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

I don't have the money to make it into a turbo...but I do have enough resoruces to get the supercharger. As for them tools and place to do it I can get'em for free coz I know some peeple. I also am mechanically inclined and have a little of know how to do it. Finallly I have time to do it on one weekend if possible. FYI, i'm always doing custom stuff to my own project cars and trucks. Tha's all i wanted to know my fellow men. Bring on them ribs!
 
Reply
Old Jun 17, 2006 | 12:02 AM
  #10  
Stealth3si's Avatar
Stealth3si
Thread Starter
Joined: Jun 2006
Posts: 5
Likes: 0
From:
Default RE: 2003 RAM 4.7L WITH whipple supercharger dual pulley (came off of 99 chevy tahoe 5.7L vortex engi

ORIGINAL: Ramsport_03

keep forgetting that the 4.7 is a 8, and noob, i think not, i'm on my second dodge, been in the auto business for 13 years
You should put that in yer signature so peeple won't get confused. Someone like yourself should get the proper recognizatino. That way you can always declare yourself.
 
Reply




All times are GMT -4. The time now is 02:15 AM.