04 Hemi Quad Cab Flowmaster Exhaust system
Thread Starter
|
Rookie
Joined: Sep 2006
Posts: 69
Likes: 0
From:
RE: 04 Hemi Quad Cab Flowmaster Exhaust system
Good Idea - looking back that may been the smarter \ better route to go.
I've decided to not monkey or modify myQC 4x4 any more since it's the family hauler and needs to be reliable, but reather get a 04\05 SRT-10 RC for a driver as well to satisfy my primal man jewlrey urges..... if one Ram is good - two is better. Selling my 70 Chevelle with 454 to make room.
GRIN
I've decided to not monkey or modify myQC 4x4 any more since it's the family hauler and needs to be reliable, but reather get a 04\05 SRT-10 RC for a driver as well to satisfy my primal man jewlrey urges..... if one Ram is good - two is better. Selling my 70 Chevelle with 454 to make room.
GRIN
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Go look at the flow rates I posted up in the FAQ section, then decide if you want a "Flow"master.
I had a 50 HD, the resonance wasn't noticeable except between about 2000-2400 rpm, right at interstate speeds with 4.56 gears.
Was not real bad, but definitely noticeable.
Recently replaced it with.........well hell, if any of y'all read ANYTHING in this section, you know...
I had a 50 HD, the resonance wasn't noticeable except between about 2000-2400 rpm, right at interstate speeds with 4.56 gears.
Was not real bad, but definitely noticeable.
Recently replaced it with.........well hell, if any of y'all read ANYTHING in this section, you know...
Professional
Joined: May 2008
Posts: 190
Likes: 0
Go look at the flow rates I posted up in the FAQ section, then decide if you want a "Flow"master.
I had a 50 HD, the resonance wasn't noticeable except between about 2000-2400 rpm, right at interstate speeds with 4.56 gears.
Was not real bad, but definitely noticeable.
Recently replaced it with.........well hell, if any of y'all read ANYTHING in this section, you know...
I had a 50 HD, the resonance wasn't noticeable except between about 2000-2400 rpm, right at interstate speeds with 4.56 gears.
Was not real bad, but definitely noticeable.
Recently replaced it with.........well hell, if any of y'all read ANYTHING in this section, you know...
http://www.youtube.com/watch?v=OLUe_d6-xDA
Hall Of Fame
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Professional
Joined: May 2008
Posts: 190
Likes: 0
That sounds pretty good. What are you running? How is it at hwy speeds?
BTW I've seen some of your other posts, and I like the looks of your truck leveled much better.
BTW I've seen some of your other posts, and I like the looks of your truck leveled much better.
Last edited by Mike649; Dec 31, 2009 at 08:10 PM.
