3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help with door panels please.

Thread Tools
 
Search this Thread
 
Old Feb 28, 2007 | 07:01 PM
  #1  
Bear39's Avatar
Bear39
Thread Starter
Joined: Feb 2007
Posts: 19
Likes: 0
Default Help with door panels please.

Hello, I'm new to the forum. I recently bought a 2004 Quad Cab Hemi with the basic 4 speaker setup. I purchased some new speakers for the doors, and was hoping someone could tell me or point me in the right direction for proper removal of the door panels. Thanks!
 
Reply
Old Feb 28, 2007 | 08:35 PM
  #2  
Valkyrie's Avatar
Valkyrie
Joined: Jan 2006
Posts: 42
Likes: 0
From:
Default RE: Help with door panels please.

Should be two screws on the bottom and one holding the door handle. I believe it's a torx type. Then you just pull up on the panel and it should come off.

Dave
 
Reply
Old Feb 28, 2007 | 08:35 PM
  #3  
DeWalt378G's Avatar
DeWalt378G
Record Breaker
Joined: Jul 2005
Posts: 1,236
Likes: 0
From: PA
Default RE: Help with door panels please.

Remove these screws;

up top where the side view mirror is
in the door handle recess
two screws at the very bottom of the panel

Remove the door handle;
Look inside where the door handle goes and remove that screw.
Remove handle.

Lift up (towards the glass)on the panel. It will just pop out. Don't pull it away too fast. Remember to disconnect the wires for the conrols.

Have fun.
 
Reply
Old Feb 28, 2007 | 11:00 PM
  #4  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default RE: Help with door panels please.

Go here http://www.hemitruckclub.com/
Look left, download FSM.
 
Reply
Old Mar 1, 2007 | 09:54 AM
  #5  
Bear39's Avatar
Bear39
Thread Starter
Joined: Feb 2007
Posts: 19
Likes: 0
Default RE: Help with door panels please.

Thanks alot guys.
 
Reply




All times are GMT -4. The time now is 10:59 AM.