4th Gen RAM general discussion/NON-tech This section is for general discussions about your 4th gen RAM. Non tech related RAM threads belong here.

2013 side step options

Old Aug 22, 2013 | 10:47 PM
  #1  
jonf305's Avatar
jonf305
Thread Starter
|
Registered User
Joined: Aug 2013
Posts: 7
Likes: 0
Default 2013 side step options

Hello everyone. I just traded my 2012 Grand Cherokee for a 2013 Ram Quad cab. I'm looking into options for side step rails. I like the factory ones but they are a bit pricey. I would like a set that mount close to the body like the factory ones. I'm not going off road (much) but I don't want any that hang low. Any suggestions for aftermarket step rails or suggestions on which ones to avoid?
 
Reply
Old Aug 23, 2013 | 12:26 AM
  #2  
War Horse's Avatar
War Horse
All Star
Joined: Jun 2009
Posts: 975
Likes: 0
From: San Antonio, TX
Default

I love the Power Steps by Amp Research. Unfortunately if you think the factory ones are pricey, the Amps will give you a coronary.

Do the 2013s bolt up the same way as the 2009 - 2012? My buddy has a 2013, and at least the factory ones on his bolt on differently than my 2009 factory set.
 
Reply
Old Aug 23, 2013 | 06:01 PM
  #3  
jonf305's Avatar
jonf305
Thread Starter
|
Registered User
Joined: Aug 2013
Posts: 7
Likes: 0
Default

Looks like the factory ones use rivnuts and mount to the body. Mine on my 03 were aftermarket and bolted on using the body mount bolts. I also got a nice little bonus check today that will cover about 2/3 of the cost of a factory set. I'll look at others though.
 
Reply
Old Aug 23, 2013 | 06:38 PM
  #4  
marvin02's Avatar
marvin02
Registered User
Joined: Aug 2013
Posts: 7
Likes: 0
Default

Every set of side steps/nerf bars I could find for the 2013 mount to the rocker panel. I went with the Steelcraft 5" Oval Nerf Bars because they are easy to install and the only black steps I could find with a lifetime warranty. I paid $255 (they were on sale when I purchased, plus a 15% first time buyers discount from autoanything)
 
Attached Thumbnails 2013 side step options-cam00031.jpg   2013 side step options-cam00039.jpg  
Reply
Old Aug 26, 2013 | 10:55 PM
  #5  
jonf305's Avatar
jonf305
Thread Starter
|
Registered User
Joined: Aug 2013
Posts: 7
Likes: 0
Default

I ended up buying a set of Ionic Stainless 3" round bars. They mount to the inside of the rockers but also have a brace to the body mount.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:34 AM.