4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

4.10's Installed

Thread Tools
 
Search this Thread
 
  #41  
Old 03-24-2009 | 09:50 AM
sarguy01's Avatar
sarguy01
Record Breaker
Joined: Feb 2009
Posts: 1,661
Likes: 1
From: Virginia Beach
Default

Originally Posted by switchblade906
Alright so what you saying that since i have the 3.55 gears and a open diff (going to change to a LSD) what gears should i get 4.10 or 3.92

i do alot of highway driving at around 70-80 MPH
You are going to do the front too? Any plans for larger tires then stock?
 
  #42  
Old 03-24-2009 | 09:53 AM
switchblade906's Avatar
switchblade906
Record Breaker
Joined: Mar 2009
Posts: 1,250
Likes: 0
From: Apopka FL
Default

Originally Posted by sarguy01
You are going to do the front too? Any plans for larger tires then stock?
yes i will be doing the front if i change the gears

and yes i will be lifting the truck but it will be after i sell my bike or just somehow come up with 7k lol
 
  #43  
Old 03-24-2009 | 09:57 AM
sarguy01's Avatar
sarguy01
Record Breaker
Joined: Feb 2009
Posts: 1,661
Likes: 1
From: Virginia Beach
Default

Originally Posted by switchblade906
yes i will be doing the front if i change the gears

and yes i will be lifting the truck but it will be after i sell my bike or just somehow come up with 7k lol
Depends on the tire size. There are charts around to figure out rpm's at different speeds with different gears, tires, etc.
 
  #44  
Old 03-24-2009 | 09:58 AM
switchblade906's Avatar
switchblade906
Record Breaker
Joined: Mar 2009
Posts: 1,250
Likes: 0
From: Apopka FL
Default

im guessing 35's - 37's
 
  #45  
Old 03-24-2009 | 09:59 AM
sarguy01's Avatar
sarguy01
Record Breaker
Joined: Feb 2009
Posts: 1,661
Likes: 1
From: Virginia Beach
Default

Originally Posted by switchblade906
im guessing 35's - 37's
Me personally, I'd keep my 3.92's for 35's. If I was doing a gear swap I'd go 4.10's for 35's. 37's I'd go for the 4.56.
 
  #46  
Old 03-24-2009 | 10:01 AM
switchblade906's Avatar
switchblade906
Record Breaker
Joined: Mar 2009
Posts: 1,250
Likes: 0
From: Apopka FL
Default

what kind of MPG would i get with the 4.10's on the highway
 
  #47  
Old 03-24-2009 | 10:03 AM
sarguy01's Avatar
sarguy01
Record Breaker
Joined: Feb 2009
Posts: 1,661
Likes: 1
From: Virginia Beach
Default

Originally Posted by switchblade906
what kind of MPG would i get with the 4.10's on the highway
With 35's, probably around the same as you are now. Some others can chime in here.
 
  #48  
Old 03-24-2009 | 10:06 AM
switchblade906's Avatar
switchblade906
Record Breaker
Joined: Mar 2009
Posts: 1,250
Likes: 0
From: Apopka FL
Default

that sounds good.

come on bountyhunter i know you have the 4.10's what kind of MPG are you getting up there with the canadian gas lol
 
  #49  
Old 03-24-2009 | 02:29 PM
bigred3297's Avatar
bigred3297
Record Breaker
Joined: Jan 2009
Posts: 1,149
Likes: 1
From: Hawaii
Default

I'll be lifting mine soon, i'm already pricing everything. I'm prob going to switch to either 4.56 or lower gears in the future, i'll see how these 3.92's do. It'll be a 6" lift on 37's. Most of my driving is under 60, usually cruising and i won't be doing much off-roading.

Thanks for the great information Mopar21277, i'll be PMing you later on when i decide to upgrade..
 
  #50  
Old 03-24-2009 | 02:37 PM
bountyhunter's Avatar
bountyhunter
Thread Starter
|
Banned
Joined: Feb 2009
Posts: 439
Likes: 0
From: CANADA
Default

Don't care about MPG...runnin' Sunoco 94 with ECM re-flash.
 

Last edited by bountyhunter; 03-24-2009 at 04:28 PM.


Quick Reply: 4.10's Installed



All times are GMT -4. The time now is 03:31 PM.