Ram Head LED
Captain
Joined: Sep 2008
Posts: 626
Likes: 1
From: Colorado Springs
No - Since the current in a series circuit is the same for every component the built in resistors for 6V LED's would not allow sufficient total current for both. However, you could use 2 of any type regular LED's in series as long as you sum their individual voltage drops for the formula I gave. One series resistor will work for any number of LED's in series, providing of course the sum of the individual drops does not exceed the 12V available.
Thread Starter
|
Rookie
Joined: Jun 2009
Posts: 57
Likes: 0
Here is the place to get the LED's for this mod. Any color and cheap.
I used the superbright 3mm.
http://www.oznium.com/led
I used the superbright 3mm.
http://www.oznium.com/led
Thread Starter
|
Rookie
Joined: Jun 2009
Posts: 57
Likes: 0
Here is the place to get the LED's for this mod. Any color and cheap.
I used the superbright 3mm.
http://www.oznium.com/led
I used the superbright 3mm.
http://www.oznium.com/led
All Star
Joined: Aug 2009
Posts: 876
Likes: 0
From: Chicago
would it be easier to just buy the resistors and led together already or would that be to big and interferer with anything?
Champion
Joined: Dec 2007
Posts: 3,563
Likes: 0
From: Ontario, Canada
Since I can't really remove the huge rear emblem without doing some body work, I went ahead and added a little something to it. I pulled it off and added 2 LED's to the eyes and wired it to my lights. Looks pretty good and was really easy to do. I took several pictures, but this is something that really looks way better in person.
