Hello everyone i want to upgrade my doors speakers my truck came with the alpine set up but since i add my 2 10's sub i need more fine sound. Which is the best door speakers for the new ram. What size are the back and front doors. And does anyone know where i can buy really good speakers cheap on the internet

 

You need some nice component speakers, you will have to build the spots to put them in but the sound is more full, I have an old chevy and have one set of 6.5" midgrade sony component speakers run by an amp of course and just those two sound so good, I was gonna go all sub woofer and stuff. just gonna hook up a set of 6x9's in the back,will beall I need. So go components front andback will sound nice, What kind.....up to your wallet.

 

The stock speaker size for the non-alpine system is 6x9's front and rear doors. I imagine the alpine system uses the same size speaker in the doors, if you are looking for an easy swap, then any shallow mount 6x9 will do. If you buy a 6x9 with a large magnet/basket you will have to cut/modify the door for clearance. I plan on doing the same and I have my eye on some pioneer three way 6x9's on sale at a local sound shop for $55.00 a pair, I don't remember the model number but they have a 2 1/4" mounting depth. I plan on swapping out all four 6x9's for pioneer 3-ways, and adding a singe 10" pioneer premier sub in a custom box powered by a 800w mono pioneer amp. I plan on keeping the factory deck for now until sirrus radio subscription ends. The pioneer amp, sub and 6x9's plus tax will set me back $349.00. So far I have only bought the sub ($59.99) and I will start making the sealed sub box tomorrow. I am shooting for at least .75 cubic feet under the driver side rear seat.

 

I bought these pioneers for my doors, being delivered tuesday. Pioneer TS-A6963R

You can get them form Sonic Electronixs online for $50 a pair and matching 3.5" dash speakers for $45. (free shipping) They have the mounting depth where you dont have to put anything out too.

 

I too am collecting my system parts. I am going to run Phoenix Gold components ( 6in. mid bass and a tweeter in each door). I still need to order the adapters to fit them in the stock 6x9 holes. Your going to need a signal processor. I went with the 3sixty from Rockford Fosgate. I also have two Kenwood KFC-XW1200F subs. Still have to buy a box and an amp big enough to push those subs. Good luck

 

Thanks for the info does anyone know if alpine makes good 6x9 also what kind of amp should I use