I had the Mopar 2.5 front so I went and got a 1.5 rear from Topguncustomz. I measured my truck before the install and was 2 inches higher in the rear. But after putting the kit on I think it looks almost perfectly level, I think anything less than 1.5 and it would have been nose high. If someone tells me how to put up picks I'd be glad to do that.

 

Anybody know what the biggest tire size you can get on stock wheels with this lift kit. That is playing a factor for me weather to get it or not.

 

In response to what tires fit, I am also considering this 2" Level kit. I spoke with the dealer and they showed me a copy of the install instructions. They state that 35x12.5x20 fit and that 37x12.5x20 will fit as well, but with a spacer, and rubbing still may occur. I found out, that with the stock wheels and tires, clearance is already less than an inch between tire and front suspension components. 12.5 wide tires will rub with stock wheels. I was told, and I saw on another thread on here, that BF Goodrich All Terrain 285/65R20's will fit. They are 11.5 wide and 34.7 tall. Not as aggressive looking as the Toyo's or Nitto's but they still look pretty good.

 

i don't know if this helps since this is such an old thread but a post just stated that the leveling kits are now like $1000 with shocks and rear springs spacers still in the front, WTF! looks like i'm going to DIY with a different kit 1 grand for a level kit is a little pricey.

 

hey, do you have a link to that post? i can't find it. thanks!

 

Mopar 2.5 inch lift thread is on page 3.

 

thanks trashman!