I have an '09 Hemi Ram and I purchased a catch can, but need hepl with installation. I have the engine cover removed, but I'n not sure which hose is the PCV hose. I also have the z bracket, but I don't know which access hole on the head I should be using. Please help me complete this install that should only take me a couple of minutes. I also never received any hoses with my can. Any help on the lengths in advance would give me time to purchase.
Thanks!
Jim

 

it should just be the rubber hose between the throttle body and the valve cover. you should be able to cut the hose you have to fit on the catch can.
on another post somewhere of the forum there is a picture of the bolt hole to use for the Z bracket.