4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2009 Ram 1500 Interior Parts

Thread Tools
 
Search this Thread
 
Old Jul 12, 2011 | 10:44 PM
  #1  
No1VikingFan's Avatar
No1VikingFan
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 4
Likes: 0
Default 2009 Ram 1500 Interior Parts

Hello everyone. I just bought a new (I know it's a 09 but it's been parked) and the first time I brought it through the "we will wash for you" car wash, the rubber inserts for the cup holders were swiped. Does anyone know where I can get another pair???
 
Reply
Old Jul 13, 2011 | 02:30 AM
  #2  
1954Radio's Avatar
1954Radio
Captain
Joined: May 2009
Posts: 731
Likes: 1
From: Louisiana
Default

Originally Posted by No1VikingFan
Hello everyone. I just bought a new (I know it's a 09 but it's been parked) and the first time I brought it through the "we will wash for you" car wash, the rubber inserts for the cup holders were swiped. Does anyone know where I can get another pair???
They may have just taken them out to clean and forgot to put them back in. Have you asked them about it?
 
Reply
Old Jul 13, 2011 | 06:20 AM
  #3  
BULLRAM's Avatar
BULLRAM
Veteran
Joined: Aug 2007
Posts: 497
Likes: 0
From: HOUSTON,TEXAS
Default

I know on mine........... if certain bottles are in there and you take them out the inserts will stick with suction to the bottom of the bottles, if it is a coke or dark color drink sometimes you cant see them on there, till you throw it out
 
Reply
Old Jul 13, 2011 | 02:16 PM
  #4  
Pull Ya's Avatar
Pull Ya
Professional
Joined: May 2011
Posts: 153
Likes: 0
Default

I agree. I think I would try to get the original pair back at the car wash!!!!!
Jay
 
Reply
Old Jul 13, 2011 | 04:47 PM
  #5  
The Craig Machine's Avatar
The Craig Machine
Rookie
Joined: Aug 2010
Posts: 58
Likes: 0
From: Ontario
Default

Mine have come out, and my wife has almost thrown them out with her coffee multiple times. Thinking about dropping a bit of Goop in there to make them stay.
 
Reply
Old Jul 13, 2011 | 05:40 PM
  #6  
No1VikingFan's Avatar
No1VikingFan
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 4
Likes: 0
Red face

You're right I shouldn't jump to conclusion but I did call and they don't have them. Do you think I could just order them?
 
Reply
Old Jul 13, 2011 | 10:19 PM
  #7  
coolatc's Avatar
coolatc
Rookie
Joined: Jul 2010
Posts: 83
Likes: 0
Default

One of mine went missing so I ordered a new one through the dealer. $11/ each. The glue down idea is a good suggestion. Don't want to buy another one.
 
Reply
Old Jul 13, 2011 | 11:20 PM
  #8  
Kbabiasz06's Avatar
Kbabiasz06
Registered User
Joined: Mar 2010
Posts: 38
Likes: 0
From: Macomb
Default

Glue down is a bad idea, If im not mistaken there are screws under those rubber cup holders, glue them down means the dealer or you have to rip them out to gain access to those screws or to clean them if something gets spilled in them. Its easier to pull them, toss them in the washer or sink and clean them then sit there and use paper towel or a towel to get whatever out of them

Just my opinion, but im pretty sure there are still screws or bolts under them
 
Reply
Old Jul 13, 2011 | 11:23 PM
  #9  
09GRIMREAPER's Avatar
09GRIMREAPER
Registered User
Joined: Jul 2011
Posts: 5
Likes: 0
From: CA
Default

wife threw one away too ..... she is no longer with us.
 
Reply
Old Jul 13, 2011 | 11:59 PM
  #10  
offroadjosh's Avatar
offroadjosh
Record Breaker
Joined: Sep 2009
Posts: 2,072
Likes: 1
From: Montana
Default

Too keep them in why not use velcro or sticky puddy?
 
Reply



All times are GMT -4. The time now is 11:58 PM.