4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

How do I tell which transfer case I have, 2011 Dodge ram sport

Old Jul 27, 2011 | 10:00 PM
  #1  
breezy5127's Avatar
breezy5127
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 2
Likes: 0
Default How do I tell which transfer case I have, 2011 Dodge ram sport

I am trying to find out what transfer case I have in a 2011 ram sport. Can some one help please. I have looked under the truck, there isnt a plate or a description that matches any of the codes I have seen for transfer cases.
Thanks!!!
 
Reply
Old Dec 23, 2011 | 12:41 PM
  #2  
LU229's Avatar
LU229
Banned
Joined: Jun 2011
Posts: 1,770
Likes: 1
Default

What i DO know, is this....
If you have the "AUTO 4x4", you have a BW44-44 (Borg Warner)
The AUTO 4x4 has 4 different modes to select from on the **** on your dash.
Description of **** as follows: 2WD/4WD Auto/4WD Lock/4WD Low

Also, if you have BW44-44 Transfer Case, do NOT use ATF-4 for fluid changes.
The "AUTO 4x4" transfer case BW44-44 has to use regular DEXRON III transmission oil.
The BW44-44 has a viscous clutch pack, has to have the more abrasive dexron-III fluid for the clutch pack to work properly.
 

Last edited by LU229; Dec 23, 2011 at 12:43 PM.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:21 AM.