4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Bilstein 5100's After Install Pics

Thread Tools
 
Search this Thread
 
Old Dec 9, 2011 | 05:16 PM
  #1  
Mikeyyy816's Avatar
Mikeyyy816
Thread Starter
|
Record Breaker
Joined: Mar 2011
Posts: 1,035
Likes: 2
From: South, FL
Default Bilstein 5100's After Install Pics

Okay so I finally got my 5100's installed! So here are some pics after the install... I will be posting up a DIY thread of how to do these for people who have never attempted them before...I'll post that later tonight or tomorrow evening of all the pics and instructions. I will say if you order the Bilstein's the instructions that come w/ it are absolutely WORTHLESS! I just purchased the TGC 3/4" Spacer for the rear since the front is a little higher than the rear.


DSC01386 by Mikeyyy816, on Flickr


DSC01385 by Mikeyyy816, on Flickr


DSC01376 by Mikeyyy816, on Flickr
 
Reply
Old Dec 10, 2011 | 10:26 AM
  #2  
trashman139's Avatar
trashman139
Veteran
Joined: Feb 2010
Posts: 257
Likes: 0
From: beavercreek, OH
Default

wanting to know if you have any wobble 4wd or 2wd ?
 
Reply
Old Dec 10, 2011 | 11:50 AM
  #3  
Mikeyyy816's Avatar
Mikeyyy816
Thread Starter
|
Record Breaker
Joined: Mar 2011
Posts: 1,035
Likes: 2
From: South, FL
Default

Originally Posted by trashman139
wanting to know if you have any wobble 4wd or 2wd ?
2wd none...

4wd haven't tried b/c I am not putting it in 4wd on dry pavement. Once I get it off the road I'll let you know...
 
Reply




All times are GMT -4. The time now is 08:24 PM.