This is the location for the 2009 manual

http://mcfail.net/dt/Service%20manual.zip

only works on a pc with IE8, with IE9 you have to go into IE settings, Internet options, security tab, and UNCHECK "enable protected". Will not work with ie10

 

You can make it work with ie10, but it is kind of a kludge. You copy it to the directory that your local webserver uses and then access it via a URL so that you can use compatability mode, which is what is required to make it work.

 

I took my 2009 Laramie 1500 in to the dealer for the same issue (clunking in dash, AC would only blow on floor and windshield), I told them what I thought the problem was and believed it should be covered by the Customer Satisfaction Letter K17. They advised it would be $95 to diagnose the problem, plus parts and labor to fix. They said they would check on the K17.

Dealer called and said it was the actuator motor and said it was not covered. Paid the bill and everything worked fine.

Contacted Ram Customer Assistance Center, they requested a copy of my invoice from the dealer and within one week I was issued a check for the full amount charged by the dealer.

I will not be returning to that dealer.

 

Good Job, glad you got your refund. The dealer should have know about the K17 and never charged you for the repair. I had to have my done twice, never charged by my dealer.

 

You can get them right off the Ram website.

http://www.ramtrucks.com/en/owners/manuals/

I hope this helps.

 

Correct ion im looking for service manual, thanks islander that's exactly what I did I downloaded the owners manual from the website found during my quest for the service manual. Service manual is over $200 on the website

 

The service manual for a 2009 is available if you go back to my post #11, aren't you paying attention?

 

link doesnt work

 

I just tried the link Friday morning 8:25 AM California time and it is working. Anyway, if you can't get it to work, PM me with your email and I'll send you the zip file. About 158 Mb

 

update,

link does work but, i had to use a pc with windows XP and IE, also had to download a reader to be able to open the program
job is completed about 6hrs

thanks