4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Tuners

Thread Tools
 
Search this Thread
 
Old Apr 15, 2015 | 11:31 PM
  #21  
timmypstyle's Avatar
timmypstyle
Rookie
Joined: Jan 2015
Posts: 66
Likes: 0
Default

The limiter settings....can be raised or lowered. Usually speed, shift points, idle rpm, etc. If you don't plan on going faster than 105, then don't change it. Idle I would leave alone unless it is having trouble staying running. Shift points can be raised from 5600 rpms. But I wouldn't go past like 6000. The exhaust thing I don't know what that is either.
 
Reply
Old Apr 16, 2015 | 09:03 AM
  #22  
wtollinger's Avatar
wtollinger
Registered User
Joined: Apr 2015
Posts: 6
Likes: 0
Thumbs up

Thank you. I lowered the RPM limit between 1 and 2 to get out of low gear quicker. Then raised the limit between 3 and 4 but nothing over the 6000 recommended. Nothing else was changed.

 
Reply




All times are GMT -4. The time now is 01:10 AM.