4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Truck Wont start or shift

Thread Tools
 
Search this Thread
 
Old Feb 24, 2017 | 08:20 AM
  #1  
iamwill80's Avatar
iamwill80
Thread Starter
|
Registered User
Joined: Feb 2017
Posts: 1
Likes: 0
Default Truck Wont start or shift

For the last 3 days my 2010 5.7 4x4 Ram was throwing the P0750 LR code then would enter limp mode. Today I installed a new (From Dodge) LR Shift Solenoid Pack part number 52119435AF. Changed both Trans filters and put new +4 ATF in.

When I turned the truck on it was in shift Lock. I over road the shift lock because the truck is on incline stands and I needed to back it down and check the ATF levels. When I overroad the Shift lock the truck locked into 2nd gear. Doesnt matter what position the shifter is in the truck stays in 2nd. P,R,N D all 2nd gear. Now because I shut the truck off, and its still in 2nd... It wont start back up because it needs to be in Park!

I tried disconnecting the battery but its is still stuck... Any help would be great.

Thanks guys!
 
Reply




All times are GMT -4. The time now is 12:30 AM.