Cargo Bed Light Install- problem
Thread Starter
|
Champion
Joined: Apr 2007
Posts: 2,831
Likes: 1
From: Miami, Fl
Cargo Bed Light Install- problem
I installed a set of the Mopar LED Cargo Bed lights, truck already had the plugs in the harness.
Went to the dealership had them add the sales code LPL as instructions stated, tech reset the bcm and cleared codes and during the bcm reset the lights would come on for a second then go back off. However once done they do not come on with the cargo light.
Anybody ran into this, dealership doesn't know what the problem is? They can troubleshoot it another day but I don't think I want to pay for a day of troubleshooting if I can narrow it down for them.
Went to the dealership had them add the sales code LPL as instructions stated, tech reset the bcm and cleared codes and during the bcm reset the lights would come on for a second then go back off. However once done they do not come on with the cargo light.
Anybody ran into this, dealership doesn't know what the problem is? They can troubleshoot it another day but I don't think I want to pay for a day of troubleshooting if I can narrow it down for them.
