4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Fan/blower issue.

Old Dec 15, 2018 | 04:05 PM
  #1  
Adams80's Avatar
Adams80
Thread Starter
|
Registered User
Joined: Dec 2018
Posts: 1
Likes: 0
Default Fan/blower issue.

I have recently had issues with my fan/blower unit (2009 Ram 1500 Laramie) When I start my truck and turn the fan on, it runs for about 10 seconds then barely runs for 5-6 minutes then runs like normal on high only. I replaced the resister (automatic fan control resistor $120) and that did not fix the issue. The same day, I replaced the blower motor ($112). and I’m still having the same issue. Any thoughts?
 
Reply
Old Dec 18, 2018 | 09:51 PM
  #2  
ripntear's Avatar
ripntear
Registered User
Joined: Apr 2009
Posts: 11
Likes: 0
Default

I've had the same problem for over a year. I've read that it may be a relay (compressor?) but have never checked it out.

Hope we can find an answer.

Thanks!
ripntear
 
Reply
Old Dec 19, 2018 | 04:36 PM
  #3  
SHO Rod's Avatar
SHO Rod
Record Breaker
10 Year Member
Liked
Loved
Community Favorite
Joined: Feb 2015
Posts: 1,130
Likes: 55
From: Iowa
Default

You're probably going to need to find someone with a high end scan tool to monitor sensors and tell the blower motor specific speeds to run at if you have the automatic climate control. Otherwise there will be a lot of either replacing parts or making measurements through the system to determine which sensor/solenoid/servo is not behaving correctly.

-Rod
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:15 AM.