4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

4x4 problems

Thread Tools
 
Search this Thread
 
Old Jun 9, 2019 | 09:07 PM
  #1  
Panther84's Avatar
Panther84
Thread Starter
|
Registered User
Joined: Jun 2019
Posts: 1
Likes: 0
From: Ontario
Default 4x4 problems

Hello, people
2010 1500ram 5.7hemi

I am having a strange problem. I was driving the other day, and my 4x4 neutral light came on by itself, the next day I had no 2wd. After playing with the 4x4 which I didn't have working the light went out, and then I had 2wd and 4wd. I did some testing shifting in and out of 4wd, and sometimes I have 2wd and 4wd, other times I have one but not the other. The light still comes on and off. Also I was driving in 2wd, and lost it the rpms just revved. I switch to 4x4auto, and drove my truck home (about 1 -2 kms)
Any thoughts on what the problem might be?
Thanks in advance.
 
Reply
Old Jun 11, 2019 | 11:31 PM
  #2  
TrueDogman's Avatar
TrueDogman
Captain
Joined: Mar 2012
Posts: 597
Likes: 33
Default

I would start by looking at the transfer case linkage (if anything) and the actuator which I believe will be similar to a electric motor which would move the transfer case into the different drive modes.
 
Reply




All times are GMT -4. The time now is 12:31 PM.