Ground Wire Question
Thread Starter
|
Legend
Joined: Nov 2014
Posts: 8,098
Likes: 318
Ground Wire Question
I'm adding a fuse/relay box to my truck for some accessories. Now looking at pre-built ones online, they take the 5 ground wires for the relay and connect them to 1 ground wire to run to the battery. Would this be safe to do? I would like to do this because it would look cleaner with just one ground wire going to the battery.
Record Breaker
Joined: Feb 2015
Posts: 1,135
Likes: 56
From: Iowa
Relay coils draw very little current. If the relays are switching power rather than switching ground, yes, using a single ground wire of probably 18 gauge or larger (lower gauge number) should be plenty sufficient. I would not run the ground all the way to the battery though. Finding a clean chassis ground near the fuse/relay box would be perfectly fine.
-Rod
-Rod
Thread Starter
|
Legend
Joined: Nov 2014
Posts: 8,098
Likes: 318
Relay coils draw very little current. If the relays are switching power rather than switching ground, yes, using a single ground wire of probably 18 gauge or larger (lower gauge number) should be plenty sufficient. I would not run the ground all the way to the battery though. Finding a clean chassis ground near the fuse/relay box would be perfectly fine.
-Rod
-Rod
Still up for that project? Sorry I never responded to your email had to go out of country for work. I hooked up your Arduino (spelling that right) for the puddle lamps. Amazing work!!!!!
