2nd Gen Dakota 9.25 rear Axle and 5.9 Block....
Thread Starter
|
Veteran
Joined: Aug 2006
Posts: 361
Likes: 0
From:
2nd Gen Dakota 9.25 rear Axle and 5.9 Block....
I am looking to get rid of a 2nd Gen Dakota 9.25 Axle and 5.9 Block that I have been sitting on for a couple years now. Cleaning out the garage and they need to go.
The axle is from a 1999 dodge dakota and is a 9.25 rear axle with 3.92 gears. The axle is in great shape although does have some marks on the edge of the drums from being dragged across the garage a few times. (Its heavy).
The cylinder block (just the main block, no heads or anything else attached) is from an R/T dakota that was disassmbled. It does have a very light scratch on the inside of one of the cylinders from when the piston was pulled out. It might actually come out with a good honing, but I had plans to bore it out when the time came.
I have been into bikes for awhile now and have to make some room for a new track bike build. So I am trying to just get them out of here. Local pick up will be required, as if I have to load them up, I am just taking them to the scrap yard down the street.
Either PM me here or send me an e-mail to jwallace92025@hotmail.com
*** In southern california, escondido, CA***
The axle is from a 1999 dodge dakota and is a 9.25 rear axle with 3.92 gears. The axle is in great shape although does have some marks on the edge of the drums from being dragged across the garage a few times. (Its heavy).
The cylinder block (just the main block, no heads or anything else attached) is from an R/T dakota that was disassmbled. It does have a very light scratch on the inside of one of the cylinders from when the piston was pulled out. It might actually come out with a good honing, but I had plans to bore it out when the time came.
I have been into bikes for awhile now and have to make some room for a new track bike build. So I am trying to just get them out of here. Local pick up will be required, as if I have to load them up, I am just taking them to the scrap yard down the street.
Either PM me here or send me an e-mail to jwallace92025@hotmail.com
*** In southern california, escondido, CA***
Last edited by Twiztid; Feb 17, 2009 at 10:00 PM.
Registered User
Joined: Mar 2006
Posts: 7
Likes: 0
Bump for a steal..
{also, you can contact kevin shultz @ engines direct and he can have them shipped almost anywhere for about 300.00 if it comes to that and your willing}
{also, you can contact kevin shultz @ engines direct and he can have them shipped almost anywhere for about 300.00 if it comes to that and your willing}
